PCI Multi-function

PCI-1002HU CR is the high-gain, 44 kS/s variant of the PCI-1002 series, a universal PCI multifunction board for acquiring analogue signals alongside digital I/O on a PC. Its 3.3 V/5 V universal PCI interface suits a wide range of host systems, and it supports Card ID via an SMD switch for identifying cards in multi-board setups.The analogue front end offers 32 single-ended or 16 differential channels at 12-bit resolution, with gains of 1, 10, 100 and 1000 and bipolar ranges from ±10 V down to ±0.01 V. Sixteen 5 V/TTL digital inputs with pull-high and pull-low resistors let an unconnected or interrupted input be given a defined state, and sixteen 5 V/TTL digital outputs are available for control tasks. The board includes one CA-4002 D-Sub connector.Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for a range of development languages, including C#.NET, Visual Basic.NET and LabVIEW, to help users build their own applications.ApplicationsLaboratory automationProduction testSensor interface

The PCI-1002HU/S CR is a universal PCI multifunction data acquisition board for engineers who need a 32-channel, 12-bit analog input at up to 44 kS/s alongside 16 TTL digital inputs and 16 TTL digital outputs. It works in both 3.3 V and 5 V PCI slots, and its high-gain input range suits low-level signals. This variant is supplied with a CA-3710 D-Sub cable.Analog inputs can be configured as 32 single-ended or 16 differential channels, with gains of 1, 10, 100 and 1000 and bipolar ranges from ±10 V down to ±0.01 V. Triggering can be done by software, an internal programmable pacer or an external 5 V/TTL signal, and data can be transferred by polling or interrupt. The digital inputs include pull-high and pull-low resistors, so a channel holds a defined state when it is disconnected or interrupted.The board is supported by a DLL, an ActiveX control and sample programs for a range of languages and operating systems, including Linux, DOS and Windows. The PCI-1002LU/HU is positioned as a replacement for the PCI-1002L/H without changes to software or drivers. The operating temperature range is 0 ~ +60°C.ApplicationsLaboratory automationProduction testSensor interface

PCI-1002LU CR is a universal PCI data acquisition board for engineers who need a 12-bit analogue input front end with digital I/O on the same card. It supports both the 3.3 V and 5 V PCI bus and provides 32 single-ended or 16 differential analogue input channels, sampled at up to 110 kS/s with the low-gain range.The card also includes 16 digital input channels and 16 digital output channels, all 5 V/TTL. The pull-high and pull-low resistors on the digital inputs let the status be predefined when a channel is disconnected or interrupted, rather than floating. It is offered as an easy replacement for the PCI-1002L/H, with no modification to existing software or driver required.Driver support covers Linux, DOS and Windows, with a DLL and ActiveX control. Sample programs are provided for a range of C/C++, Delphi, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW environments. This ordering code includes one CA-4002 D-Sub connector.ApplicationsLaboratory automationProduction testSensor interface

PCI-1002LU/S CR is a 3.3 V/5 V universal PCI multifunction data acquisition board for engineers who need fast analog input alongside digital I/O in a PC. The LU variant uses low-gain analog input at up to 110 kS/s, and the board is positioned as a direct replacement for the PCI-1002L/H, with no software or driver changes required.The board provides 32 single-ended or 16 differential 12-bit analog input channels, 16 digital inputs and 16 digital outputs, all at 5 V/TTL levels. Pull-high and pull-low resistors on the DI channels let the input state be defined when a channel is disconnected or interrupted, rather than floating.This order code includes a CA-3710 D-Sub cable. Drivers and a DLL with ActiveX control are provided for Linux, DOS and Windows, with sample programs for several C/C++, Delphi, Visual Basic, C# and LabVIEW environments.ApplicationsLaboratory automationProduction testSensor interface

PCI-1202HU CR is a universal PCI multifunction data acquisition board for engineers who need gap-free analogue capture at up to 44 kS/s on a PC. It provides 32 single-ended or 16 differential 12-bit analogue inputs, two analogue outputs, and 16 channels each of 5 V/TTL digital input and output, all on one card.This HU variant is the 44 kS/s model with the 1K-word FIFO. Compared with the 110 kS/s LU version, it trades sampling speed for finer input ranges, down to ±0.005 V full scale in its bipolar settings. The 8K-FIFO versions are the choice where buffering matters more than the single-card cost. The card supports the 3.3 V and 5 V PCI bus and includes a CA-4002 D-Sub connector.The board offers software, internal pacer and external 5 V/TTL triggering, with a Magic Scan controller and continuous capture for demanding acquisition tasks. Digital inputs include pull-high and pull-low resistors, and a 4-bit Card ID switch helps identify boards in multi-card systems.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O ports

PCI-1202HU/S CR is a universal PCI data acquisition board for engineers who need high-speed, 12-bit analog input with digital I/O on one card. It sits on either a 3.3 V or 5 V PCI bus and offers 32 single-ended or 16 differential analog input channels sampled at up to 44 kS/s, with the 8K word FIFO buffering data during busy multitasking operation.Compared with the CR variants supplied with a CA-4002 D-Sub connector, this ordering code includes a DB-1825 daughter board. The card also provides two analog output channels, 16 digital inputs with pull-high and pull-low resistors, and 16 digital outputs at 5 V/TTL levels. Software, internal programmable pacer and external triggers are supported, and a Card ID switch helps identify boards in multi-card systems.Typical uses include high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port

The PCI-1202LU CR is a universal PCI data acquisition board for engineers who need fast 12-bit analogue input in a PC. It offers 32 single-ended or 16 differential inputs sampling at up to 110 kS/s, with a 1024-sample FIFO to buffer data between the board and the host.Beyond analogue input, the board provides 2 analogue outputs, 16 TTL/5 V digital inputs with pull-high and pull-low resistors, 16 TTL/5 V digital outputs, and three 16-bit timer/counter channels. Software, internal pacer and external 5 V/TTL triggering are supported, with data transferred by polling.This ordering code is the low-gain 110 kS/s variant with the 1K-word FIFO. The HU version samples at 44 kS/s for high-gain work, and the /8K versions add an 8K-sample FIFO. The board is supplied with one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port

PCI-1202LU/8K CR is a 12-bit PCI data acquisition board for engineers who need fast, gap-free sampling inside a PC. It offers 32 single-ended or 16 differential analog inputs sampled at up to 110 kS/s, with an 8K-word hardware FIFO that helps prevent data overflow when the host is busy with other tasks under Windows or Linux.The universal PCI interface works in both 3.3 V and 5 V bus slots. The board includes 16 digital inputs with pull-high and pull-low resistors, 16 digital outputs at 5 V/TTL levels, and two analog outputs. Acquisition can be started by software, the internal programmable pacer or an external 5 V/TTL trigger, with MagicScan control and continuous capture support. A four-bit Card ID switch helps identify boards in multi-card systems.The package includes one CA-4002 D-Sub connector. The board is suited to high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1202LU/S CR is a universal PCI multifunction data acquisition board for high-speed analogue input work in PC-based systems. It provides 32 single-ended or 16 differential analogue inputs with 12-bit resolution, sampled at up to 110 kS/s, together with 2 analogue outputs and 16 digital inputs and 16 digital outputs, all at 5 V/TTL levels.This variant is supplied with a DB-1825 daughter board rather than the CA-4002 D-Sub connector, and uses the 8 K word FIFO listed in its ordering information to buffer analogue samples. The board works with both 3.3 V and 5 V universal PCI slots, and the 4-bit Card ID switch helps identify boards in multi-card systems.Typical uses include high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602FU CR is a high-speed multifunction card for PC-based data acquisition. This ordering code is the 200 kS/s version of the PCI-1602U series, sampling its 16-bit analog inputs at up to 200 kS/s and buffering results in an 8192-sample hardware FIFO, which helps when capturing fast or multi-channel signals on a host PC.The board fits Universal PCI slots and works with both 3.3 V and 5 V PCI buses. Analog inputs can be set to 32 single-ended or 16 differential channels by jumper, with programmable gain of 1, 2, 4 and 8. Alongside the analogue side, it offers a 2-channel 12-bit analog output and 16 channels each of 5 V/TTL digital input and output, with pull-high and pull-low resistors on the DI channels. The board is pin-compatible with the PCI-1602/F and does not need changes to existing software or drivers.This order includes one CA-4002 D-Sub connector. Driver support covers Linux, DOS and Windows, with a DLL and ActiveX control plus sample programs for several C, Visual Basic, C#.NET and LabVIEW environments. A Card ID switch lets software identify each card when two or more are installed in the same computer.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysisDigital pattern generator from digital I/O port

The PCI-1602FU/S CR is a high-speed PC-based multifunction board for engineers who need fast, multichannel analogue acquisition alongside digital I/O. Its 16-bit converter samples at up to 200 kS/s, and the 8192-sample FIFO buffers data so the host PC can keep pace with acquisition.Analogue inputs are available as 32 single-ended or 16 differential channels, with programmable gain of 1, 2, 4 and 8 and bipolar ranges from ±1.25 V to ±10 V. A built-in MagicScan controller handles multi-channel scanning, and triggering can be software, internal pacer, or external (5 V/TTL). Two 12-bit analogue outputs and 16 digital inputs and 16 digital outputs (5 V/TTL) complete the I/O set.The board fits a 3.3 V/5 V Universal PCI slot and includes a Card ID switch, so individual cards can be identified in software when two or more are installed in the same computer. It is a drop-in replacement for the PCI-1602/F with no software or driver changes, and the supplied CA-3710 D-Sub cable connects it to external signals.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602U CR is a high-performance multifunction card for high-speed analogue and digital I/O on a PC. It uses the Universal PCI interface, so it runs on either a 3.3 V or a 5 V PCI bus. The 16-bit AD converter samples at up to 100 kS/s, buffered by an 8 K-sample hardware FIFO and a MagicScan controller for multi-channel scanning.The analogue inputs can be configured as 32 single-ended or 16 differential channels using jumpers, with a programmable gain of 1, 2, 4 or 8 and bipolar ranges from ±1.25 V to ±10 V. Two 12-bit analogue outputs and 16 channels each of 5 V/TTL digital input and output complete the I/O set. Pull-high and pull-low resistors on the digital inputs hold a predefined state when channels are disconnected or interrupted.A Card ID switch lets software identify this board when two or more PCI-1602U cards are installed in the same computer. Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for several development environments. This ordering code includes one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602U/S CR is the 100 kS/s version of the PCI-1602U multifunction board. It combines a 16-bit analogue input section, a 2-channel 12-bit analogue output and 16 channels each of 5 V/TTL digital input and output on one Universal PCI card. The board supports both the 3.3 V and 5 V PCI bus, so it can be fitted in either slot type.The analogue inputs are jumper selectable between 32 single-ended and 16 differential channels, with a programmable gain of 1, 2, 4 or 8. An 8192-sample hardware FIFO and a MagicScan controller for multi-channel scanning support high-speed acquisition. The onboard Card ID switch lets software identify each board when two or more cards are installed in the same computer.This board is fully compatible with the PCI-1602/F and can be used as a direct replacement without changes to software or driver. A DLL, an ActiveX control and sample programs for several languages are provided, and the card supports Linux, DOS and Windows. The order includes one CA-3710 D-Sub cable.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port

PCI-1800HU CR is a universal PCI data acquisition board for engineers who need multichannel analog input alongside analog output and digital I/O in one slot. The card works with both 3.3 V and 5 V PCI buses and provides 16 single-ended or 8 differential analog input channels with a 12-bit converter running at up to 44 kS/s. This HU variant is the lower-speed member of the PCI-1800 series; the LU variant offers 330 kS/s.The board includes two 12-bit analog outputs, 16 digital inputs and 16 digital outputs, all at 5 V/TTL levels. MagicScan, a built-in A/D scan controller, handles channel selection, gain setting, settling time, ADC triggering and data retrieval, and it can apply a different gain code to each channel during a channel scan. A Card ID switch lets software identify individual boards when two or more cards are fitted in one computer, and pull-high and pull-low jumpers set a defined DI state when inputs are unconnected or broken.Software support covers Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows XP/2003/2008/Vista/7. The SDK includes DLLs, ActiveX controls and sample programs for several development environments, including Visual Basic, C#.NET and LabVIEW. The package includes one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysis

The PCI-1800HU/S CR is a universal PCI data acquisition board for engineers who need multi-channel analogue input, analogue output and TTL digital I/O in one card. Its 12-bit A/D converter runs at up to 44 kS/s and accepts 16 single-ended or 8 differential inputs, with programmable gain ranges from 0.5 to 1000.The MagicScan controller handles channel selection, gain, settling time, ADC triggering and data retrieval, so each channel in a scan can use its own gain code while the aggregate rate stays at 44 kS/s. Triggering can be by software, the internal pacer or an external 5 V/TTL signal, and data is read by polling through a 1024-sample FIFO.This ordering code includes the DB-8225 terminal board and one CA-3710 D-Sub cable for straightforward field wiring. The board suits a 3.3 V or 5 V universal PCI slot, and the Card ID switch lets software identify individual boards when two or more are installed in one computer.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysis

The PCI-1800LU CR is a universal PCI data acquisition board for engineers who need fast multi-channel analogue input alongside analogue and digital I/O in a single PCI slot. It accepts both 3.3 V and 5 V PCI bus signalling and provides 16 single-ended or 8 differential analogue input channels with a 12-bit converter running at up to 330 kS/s.The MagicScan controller handles channel selection, gain setting, settling time, ADC triggering and data retrieval, so per-channel gain codes can be used during channel scanning while maintaining the full sampling rate. Two 12-bit analogue outputs, 16 TTL digital inputs with selectable pull-high or pull-low resistors, and 16 TTL digital outputs complete the board.This ordering code includes a CA-4002 D-Sub connector. The /S variant (PCI-1800LU/S CR) is supplied with a DB-8225 terminal board and CA-3710 D-Sub cable instead, while the PCI-1800HU CR offers the same card at 44 kS/s.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysis

PCI-1800LU/S CR is a universal PCI data acquisition board for engineers who need fast multi-channel analogue input alongside digital I/O in a single PC slot. The 12-bit A/D converter samples at up to 330 kS/s and accepts 16 single-ended or 8 differential inputs, with software-selectable gain and ranges from bipolar ±10 V down to ±0.005 V and unipolar 0 to 10 V down to 0 to 0.01 V.The MagicScan controller handles channel selection, gain setting, settling time, ADC triggering and data retrieval, so each channel in a scan can use its own gain code while the full scan still runs at up to 330 kS/s. Two 12-bit analogue outputs, 16 TTL digital inputs with selectable pull-high or pull-low resistors, and 16 TTL digital outputs complete the I/O set. A 4-bit Card ID switch lets software identify individual boards when two or more are installed in the same computer.This ordering code includes a DB-8225 terminal board and a CA-3710 D-Sub cable, so field wiring can be terminated without a separate connector kit. The 330 kS/s model is the faster variant in the LU/HU pair; the PCI-1800HU/S CR offers the same channel count at 44 kS/s. SDK support covers DLLs, an ActiveX control and sample programs for several development environments, including Visual Basic, C#.NET and LabVIEW.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysis

The PCI-1802HU CR is a multifunction data acquisition board for PCs with a universal PCI slot. It combines a 12-bit analogue input section sampling at up to 44 kS/s with two 12-bit analogue outputs and 5 V/TTL digital I/O, so a single card can cover most acquisition and control tasks on a host PC.Choose this variant when you need the 44 kS/s sampling rate rather than the 330 kS/s of the PCI-1802LU. Each analogue input can be configured for a wide range of gains and bipolar or unipolar ranges, and the MagicScan controller handles multi-channel scanning in hardware. The 8192-sample FIFO buffers data during acquisition.Supports a 4-bit Card ID switch so software can identify each card when two or more are installed in one computer.Includes one CA-4002 D-Sub connector for field wiring.Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for several languages and LabVIEW.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysis

The PCI-1802HU/S CR is a high-speed multifunction data acquisition board for Universal PCI slots, combining analogue input, analogue output and TTL digital I/O on a single card. This version samples at up to 44 kS/s, making it the lower-rate option in the PCI-1802 family for engineers who need multichannel acquisition without the higher 330 kS/s rate. It is supplied with a CA-3710 D-Sub cable.The card offers 32 single-ended or 16 differential analogue inputs, selectable by jumper, with a programmable PGA for low and high gain ranges. An 8192-sample hardware FIFO and a MagicScan controller support multi-channel scanning. Triggering can be by software, internal pacer, or external 5 V/TTL signal. A 2-channel 12-bit analogue output and 16 channels each of 5 V/TTL digital input and output complete the I/O set.An onboard Card ID switch lets software identify individual boards when two or more cards are installed in the same computer. Pull-high and pull-low resistors on the DI channels define a known state when inputs are disconnected or floating. The card is designed as a drop-in replacement for the PCI-1802H without software or driver changes, and drivers and sample programs are provided for Linux, DOS and Windows environments.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysis

The PCI-1802LU CR is a high-speed multifunction data acquisition board for desktop PCs with a Universal PCI slot. Its 12-bit analog-to-digital converter samples at up to 330 kS/s and can be configured as 32 single-ended or 16 differential inputs, with an 8K-sample hardware FIFO to buffer acquired data. It suits engineers who need fast multi-channel acquisition alongside control outputs in a single card.Analog input gain and range options cover both bipolar and unipolar signals, and a MagicScan controller handles multi-channel scanning. The board also provides two 12-bit analog outputs, 16 channels of 5 V/TTL digital input and 16 channels of 5 V/TTL digital output, with pull-high and pull-low resistors on the digital inputs so that disconnected channels read a defined state.The card is a drop-in replacement for the PCI-1802L/H without requiring changes to existing software or drivers. A Card ID switch lets software tell apart two or more cards in the same computer. The CA-4002 D-Sub connector is included with this ordering code.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysis

PCI-1802LU/S CR is a high-speed multifunction data acquisition board for Universal PCI slots. It combines a 12-bit, 330 kS/s analog input section with analog and digital outputs on one card, and is supplied with a CA-3710 D-Sub cable.Analog inputs are jumper selectable between 32 single-ended and 16 differential channels, with a programmable gain stage and an 8192-sample hardware FIFO. The built-in MagicScan controller handles multi-channel scanning, and acquisition can be started by software, the internal pacer or an external 5 V/TTL trigger.Compared with the PCI-1802LU CR, which ships with a CA-4002 D-Sub connector, this variant includes the CA-3710 cable. Driver support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for several languages and LabVIEW.ApplicationsHigh speed data acquisition systemProcess monitoring and controlVibration analysis

The PCI-2602U is a high-speed multifunction data acquisition board for Universal PCI slots. It suits engineers who need fast analogue capture alongside analogue output and programmable digital I/O on a single card, with the acquisition workload handled largely by the board rather than the host processor.Acquisition and signal conditioning: The 16-bit ADC samples at up to 1 MS/s and buffers data in an 8192-sample hardware FIFO. MagicScan automates channel selection, gain, settling and conversion, and the programmable digital inputs include a filter to suppress noise, glitches and switch bounce in electrically harsh environments.Software, pacer and external analogue or digital triggering for synchronised capturePolling, interrupt and DMA data transfer optionsSoftware calibration with calibration data stored in EEPROM, so no jumpers or trim-pots are neededOnboard 4-bit Card ID switch to tell apart multiple boards in one systemThe board is supported under DOS and Windows, with a DLL, ActiveX control and sample programs for several development environments including Visual C++, Visual Basic.NET, C#.NET and LabVIEW.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysis

The PCI-822LU CR is a PCI multifunction board for engineers who need fast analogue acquisition alongside digital I/O in a single card. Its 12-bit A/D converter runs at up to 250 kS/s, and an 8 K-sample hardware FIFO buffers readings so the host PC can keep up with the data stream.Input configuration is selected by jumper, giving either 32 single-ended or 16 differential analogue inputs with programmable gain (1, 2, 4, 8). The built-in MagicScan controller handles channel selection, gain, settling time and conversion triggering, which reduces the processing load on the CPU, even when scanning channels with different gain codes.The board also provides two 16-bit analogue outputs and 32 bi-directional 5 V/TTL digital channels with pull-high and pull-low resistors and digital output readback. A Card ID switch lets software identify individual boards when two or more PCI-822LU cards are installed in one computer. The ordering code includes one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysis

The PCI-826LU CR is a multifunction data acquisition board for PCI slots, combining high-speed analogue input with analogue output and programmable digital I/O on a single card. Its universal PCI interface supports both 3.3 V and 5 V PCI buses, which suits a range of host computers.The 16-bit A/D converter samples at up to 250 kS/s and is buffered by an 8 K-sample hardware FIFO. A built-in MagicScan controller handles channel selection, gain, settling time, conversion and data retrieval, so the host CPU is largely offloaded, even when scanning channels with different gain codes. Software and pacer triggers are supported, with polling or interrupt data transfer.Pull-high and pull-low resistors on the digital inputs keep unconnected channels at a defined level, and digital output status can be read back at register level. A Card ID switch lets software identify individual boards when two or more PCI-826LU cards are installed in the same computer. The ordering code includes one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysis