PMD Series
The PMD-2201-EN is a panel-mounted power meter concentrator that gathers readings from ICP DAS Modbus power meters over RS-485 or Ethernet and stores them locally. Its built-in web server lets engineers view live and historical power data and set up the system from any browser, so no additional software tool or programming is needed.A 7-inch TFT display with a resistive touch panel provides on-site viewing and parameter setting. Connected Modbus I/O modules can be controlled from the power status, and an IF-THEN-ELSE logic engine supports power demand management, including load shedding where required. Alarms can be sent by LINE, Telegram or Email.For system integration, the unit supports Modbus TCP/RTU, SNMP, FTP and MQTT, and can connect to Microsoft Azure and IBM Bluemix IoT platforms. Power data is logged to a microSD card and sent back automatically once a disconnected network is restored. It can be powered from 12 ~ 48 VDC or from PoE (IEEE 802.3af).ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging and statistical reporting
PMD-2201-SC is a browser-configured power meter concentrator for engineers building energy monitoring and management systems. It polls ICP DAS Modbus power meters over RS-485 or Ethernet, records the readings and makes them available locally on its 7" touch panel and remotely through its built-in web server, so most setup can be done without writing code.Control logic is handled on the device itself. A built-in IF-THEN-ELSE engine, timers and schedules can switch Modbus I/O modules according to power status, supporting power demand management and load shedding where required. Alarms can be sent via LINE, Telegram or Email, and power data can be logged to a microSD card and sent back automatically once a disconnected network is restored.For integration, the unit supports Modbus TCP/RTU, SNMP, FTP and MQTT, and can connect to Microsoft Azure and IBM Bluemix IoT platforms as well as the ICP DAS IoTstar cloud software. This Simplified Chinese version is designed for panel mounting and is powered from 12 ~ 48 VDC or PoE (IEEE 802.3af).ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging and historical power reportingRemote alarm notification for power systems
The PMD-2201-TC CR is a panel-mount power meter concentrator for engineers who need to collect, log and act on energy data without writing control software. Configuration is done in a browser or on the local 7" touch display, so logic, schedules and reports are set up through web pages rather than programmed. The -TC suffix identifies the Traditional Chinese variant.The unit reads ICP DAS Modbus power meter modules and Modbus I/O modules over two RS-485 ports and one RJ-45 Ethernet port. Up to 24 power meter modules plus 8 I/O modules can be connected, subject to a maximum of 16 Modbus TCP modules in total. A built-in IF-THEN-ELSE logic engine supports power demand management, and I/O modules can be switched according to power status, for example to shed loads.Measured values are logged to a microSD card, with data log files sent back automatically once a disconnected network is restored. Alarm messages can be sent via LINE, Telegram or Email, and the unit supports Modbus TCP/RTU, SNMP, FTP and MQTT for integration with SCADA, MES and IoT platforms, including Microsoft Azure and IBM Bluemix.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower usage efficiency (PUE) monitoring
The PMD-2206-EN is a web-based power meter concentrator for energy measurement, monitoring and management. It reads power data from ICP DAS Smart Power Meters over RS-485 or Ethernet, logs the values to a microSD card and presents them on a 7-inch TFT touch panel, in a browser or both. Configuration is done through built-in web pages, so no separate software tool or programming is needed.The unit combines power demand management with I/O control. An IF-THEN-ELSE logic engine can act on power status through Modbus I/O modules, including load shedding where required, and a schedule function governs I/O device operation. Alarm messages can be sent via LINE, Telegram, Email or WeChat, and data can be forwarded to Modbus TCP/RTU, SNMP, FTP and MQTT systems or to Microsoft Azure and IBM Bluemix IoT platforms.This ordering code is listed as For China Only in the product description. The WeChat notification feature requires an Enterprise WeChat account in China.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging and statistical reportingSCADA, MES and IoT integration of power data
PMD-2206-SC CR is a web-based power meter concentrator that collects power data from ICP DAS Modbus power meters and I/O modules, records it to a microSD card and presents it on a built-in 7-inch touch panel or through a browser. Configuration is done through web pages, so no separate software tool or programming is needed to set up logic control.The unit reads power meters over its two RS-485 COM ports or over Ethernet, supporting up to 24 ICP DAS Modbus power meter modules and 8 Modbus I/O modules in total. An IF-THEN-ELSE logic engine, timers and schedules let it adjust I/O devices according to power status, which supports power demand management and load shedding. Alarms can be sent by LINE, Telegram, Email or WeChat.Data is shared with back-end systems over Modbus TCP/RTU, SNMP, FTP and MQTT, and it can connect to Microsoft Azure, IBM Bluemix or ICP DAS IoTstar Cloud. This is the Simplified Chinese version, intended for China only, and its WeChat alarm function requires an Enterprise WeChat account in China.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingAlarm notification for power consumption
The PMD-2206-TC CR is a web-based power meter concentrator that collects power data from ICP DAS Modbus power meters over RS-485 or Ethernet, logs it locally and presents it through a browser or its onsite display. Configuration is done in the web interface, so no separate software tool or programming is needed to set up a monitoring system.Control and alarm logic is handled by a built-in IF-THEN-ELSE engine, which supports power demand management and can shed load on connected devices where required. Alarms can be sent via LINE, Telegram, Email or WeChat, with WeChat delivery requiring an Enterprise WeChat account in China. Data logs are stored on microSD and sent back automatically once a disconnected network is restored.The unit has a 7-inch TFT LCD with a resistive touch panel and is designed for panel mounting, with PoE (IEEE 802.3af) or a 12 ~ 48 VDC supply. It supports Modbus TCP/RTU, SNMP, FTP and MQTT for integration with SCADA, MES and IoT back-end systems. This ordering code is the Traditional Chinese interface version, supplied for China only.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower usage effectiveness (PUE) monitoring
PMD-4201-EN CR is a browser-configured power meter concentrator for energy measurement, monitoring and management. It polls ICP DAS power meters over RS-485 or Ethernet, records readings to a microSD card, and gives local and remote access to the data without a separate configuration tool.Power demand management is handled on the device itself. A built-in IF-THEN-ELSE logic engine works with Modbus I/O modules to adjust equipment according to power status, and alarms can be sent by LINE, Telegram or Email. Connected devices can be shed when required, which suits sites that need to limit consumption in real time.Integration with supervisory and IT systems uses Modbus TCP/RTU, SNMP, FTP and MQTT, along with connection to Microsoft Azure, IBM Bluemix and ICP DAS IoTstar Cloud. The 10.4" touch panel supports local viewing and parameter setting, and PoE is supported for power.ApplicationsEnergy measurement, monitoring and managementPower demand management with load shedding of connected devices
PMD-4201-SC is a Simplified Chinese edition of ICP DAS's power meter concentrator, built for panel mounting. It reads power data from ICP DAS Modbus power meters over RS-485 or Ethernet, logs the readings and makes them available locally on its 10.4" touch panel or remotely through a built-in web server. Configuration is done in a browser, so no separate software tool or programming is needed.Beyond monitoring, the unit runs an IF-THEN-ELSE logic engine that can act on power status by switching Modbus I/O modules. This supports power demand management and load shedding, with schedules and timers for equipment control. Alarm messages can be sent via LINE, Telegram or Email, and the -SC suffix identifies the Simplified Chinese language version, distinct from the -EN and -TC editions.Data can be stored on a microSD card and is sent back automatically when a dropped network connection is restored. Integration with SCADA, MES, IT and IoT back-end systems is handled through Modbus TCP/RTU, SNMP, FTP and MQTT, with connection options for Microsoft Azure, IBM Bluemix and ICP DAS IoTstar Cloud.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging and reporting for SCADA, MES and IoT systems
The PMD-4201-TC is a web-based power meter concentrator for engineers building energy monitoring and power management systems. It collects power data from ICP DAS Modbus power meters over RS-485 or Ethernet, records readings to a microSD card and presents them on a built-in 10.4-inch touch panel or through a browser, with no extra software tool needed for setup.Control logic is configured through web pages rather than programming. A built-in IF-THEN-ELSE logic engine, timers, schedules and alarm notifications via LINE, Telegram or Email allow the unit to adjust connected I/O modules according to power status, supporting power demand management and load shedding where required.For integration, the unit supports Modbus TCP/RTU, SNMP, FTP and MQTT, and can connect to Microsoft Azure, IBM Bluemix and ICP DAS IoTstar cloud services. The Traditional Chinese (TC) variant is the version ordered under this code.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower usage effectiveness (PUE) setting and displayLocal power data display and reporting for building or plant power systems
The PMD-4206-EN is a web-based power meter concentrator for engineers building energy measurement and power management systems. It reads data from ICP DAS Smart Power Meters over RS-485 or Ethernet, records power values to a data logger, and supports load shedding through Modbus I/O modules. Configuration is done in a browser, so no separate software tool or programming is required.Power data can be viewed on the built-in 10.4" TFT LCD touch panel, on a browser or as historical statistics reports. A built-in IF-THEN-ELSE logic engine, timers and schedules support power demand management, and alarms can be sent via LINE, Telegram, Email or WeChat. Data log files are sent back automatically and recovered when the network connection resumes.Ordering code PMD-4206-EN CR is the English-language version of the PMD-4206-EN. The manufacturer lists this variant as For China Only, and WeChat notifications require an Enterprise WeChat account in China.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging and statistical reportingPower usage efficiency (PUE) monitoring
PMD-4206-SC CR is a web-based power meter concentrator that collects power data from ICP DAS Modbus power meters and Modbus I/O modules, logs readings and applies simple control logic, all configured from a browser or the front-panel touch display. No separate software tool or programming is needed, as the control logic is edited through the built-in web pages.The unit combines a 10.4" TFT touch panel with PoE (IEEE 802.3af) support and can be panel mounted. Connectivity covers two RS-485 ports and one Ethernet port, and the device can read up to 24 Modbus power meter modules plus 8 Modbus I/O modules, with a maximum of 16 Modbus TCP modules. Built-in IF-THEN-ELSE logic, timers and schedules support power demand management and load shedding, while alarms can be sent via LINE, Telegram, Email or WeChat. The WeChat option requires an Enterprise WeChat account in China.Supported protocols include Modbus TCP/RTU, SNMP, FTP and MQTT, with connections to Microsoft Azure, IBM Bluemix and ICP DAS IoTstar cloud services. This Simplified Chinese version is intended for use in China only.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingReal-time monitoring and control of device power consumption
PMD-4206-TC is a web-based power meter concentrator that gathers readings from ICP DAS power meters and Modbus I/O modules, logs the data and gives engineers both local and remote views of energy use. It is configured through a browser, so no separate software tool or programming is needed to set up the system.The unit has a 10.4" TFT LCD with touch panel for on-site viewing and parameter setting, and is designed for panel mount installation. It offers COM1, COM2 and LAN connections, and PoE is supported. Power data can be shown in real time or as history, and statistics reports can be generated from the browser.A built-in IF-THEN-ELSE logic engine supports power demand management and can adjust I/O devices according to power status. Alarms can be sent via LINE, Telegram, Email or WeChat; the WeChat option requires an Enterprise WeChat account in China. This Traditional Chinese variant is listed for China only.ApplicationsEnergy measurement, monitoring and managementPower demand management and load sheddingPower data logging, statistics and analysis