Wireless Communication

4GB microSD card.

The APW77BAM-EU CR is a wall-mount thin access point aimed at medium-sized businesses that need to extend an existing wireless network. It runs on 2.4 GHz and 5 GHz with IEEE 802.11a/b/g/n/ac support and can be powered from IEEE 802.3af PoE or a 12 VDC/1A supply.Operating modes include AP Only, WDS Only, WDS Hybrid, Universal Repeater and Client. Universal Repeater mode is a practical way to extend coverage by linking to other access points, which helps when building a larger wireless infrastructure.For segmented access, the unit can emulate up to 8 APs with different ESSIDs, with traffic separated by VLAN IDs. This suits separating guest and corporate wireless traffic. The access point supports up to 128 clients and the WEP, WPA, WPA2, WPA-PSK, WPA2-PSK and 802.1x security methods.ApplicationsExtending existing wireless networks in medium-sized businessesSegmenting guest and corporate wireless accessBuilding larger wireless infrastructures by linking access points

The BG96 CR is an LPWA communication module combining LTE Cat M1, LTE Cat NB1 and EGPRS in one device. It is built on the standard Mini PCI Express card format, so manufacturers can add cellular connectivity to their own designs without a custom board layout.On LTE the module supports up to 375 Kbps downlink and 375 Kbps uplink. Its global frequency band coverage spans 2G GPRS bands at 850/900/1800/1900 MHz and a broad set of FDD LTE bands, with B39 TDD available for Cat M1. Ultra-low power consumption is a key design point for battery-powered or power-constrained devices.For teams replacing an existing design, the module offers a migration route from GSM/GPRS, UMTS/HSPA and LTE modules. It operates from -35°C to +75°C and carries RED, FCC, RoHS and WEEE certification markings. Region of production is China.ApplicationsOEM integration of cellular connectivity into devicesLow-power wide-area (LPWA) IoT devices

The BLE-USB CR is a compact converter that bridges a USB host to a Bluetooth low energy piconet. It suits engineers who need a USB-attached BLE radio without an external power supply or antenna, as the unit is USB socket powered and uses a 1.0 dBi chip antenna.The module offers two transmission modes. In advertisement mode it operates as broadcaster or observer, while in connection mode it can act as central or peripheral. Connection parameters such as RF power level, broadcast parameters and the number of slaves are set through AT commands, and the supplied Windows utility allows configuration and testing over USB. A slave security mechanism causes the device to ignore connection requests from illegal masters.The manufacturer lists this ordering variant for Asia only. Please check the intended deployment region before specifying the unit for European projects.ApplicationsWireless USB-to-Bluetooth LE links for Windows PCsConnecting Bluetooth LE devices to WinPAC and LinPAC controllers

Single-headed IR emitter cable (with adhesive pad, Ø 3 mm IRED, 2.5 m).

Single-headed IR emitter cable (with adhesive pad, Ø 5 mm IRED, 2.5 m).

Dual-headed IR emitter cable (with adhesive pad, Ø 3 mm IRED, 2.5 m).

Dual-headed IR emitter cable (with adhesive pad, Ø 5 mm IRED, 2.5 m).

EC20-CE CR is a 4G LTE Category 4 module aimed at machine-to-machine and IoT deployments. It uses the 3GPP Release 11 LTE feature set and comes in the standard Mini PCIe card format, so it can be fitted into a host device as a cellular communication module without a custom board layout.On LTE it provides up to 150 Mbps downlink and 50 Mbps uplink. Because it is backward-compatible with EDGE and GSM/GPRS networks, the module can still connect in remote areas that have no 4G or 3G coverage. Supported LTE bands are FDD B1/B3/B8 and TDD B38/B39/B40/B41, with WCDMA 900/2100 MHz and GSM 900/1800 MHz for legacy networks.The operating range is -35 to +75 °C, with storage from -40 to +85 °C. The module holds CCC, RoHS and WEEE certification and is listed as produced in China.ApplicationsM2M communicationIoT devices and gatewaysRemote sites with limited or no 4G or 3G coverage

EC21-AU CR is a low-power LTE category 1 module designed for M2M and IoT products that need economical, efficient cellular connectivity. It supports up to 10 Mbps downlink and 5 Mbps uplink on 4G LTE, which suits applications where data rate is less important than a stable, reliable network connection.The module uses the standard PCI Express Mini Card (Mini PCIe) form factor, so it can be fitted into a device design without a custom interface. Its 4G coverage spans FDD LTE bands B1, B2, B3, B4, B5, B7, B8 and B28 plus TDD LTE band B40. For legacy networks it also provides 3G WCDMA on 850/900/1900/2100 MHz with DC-HSPA+ up to 42 Mbps downlink, and 2G GPRS/EGPRS on 850/900/1800/1900 MHz.The compact module measures 30.0 x 51.0 x 4.9 mm (W x L x H) and operates from -35 °C to +75 °C, with storage rated from -40 °C to +85 °C. It is certified to FCC, RoHS and WEEE requirements and is produced in China.ApplicationsM2M and IoT devicesApplications where network rate is not critical but a stable, reliable LTE connection is requiredBroadband IoT products needing cellular connectivity

EC25-E CR is an LTE Cat 4 communication module for engineers adding cellular connectivity to M2M and IoT equipment. Its standard Mini PCIe card format lets manufacturers integrate wireless connectivity into their devices without a custom carrier design.The module supports LTE FDD bands B1, B3, B5, B7, B8 and B20 and TDD bands B38, B40 and B41, with up to 150 Mbps downlink and 50 Mbps uplink. Backward compatibility with GSM/GPRS and EDGE networks keeps the link available where 4G or 3G coverage is absent.The EC25-E CR carries RED, RoHS and WEEE certification and is rated for an operating temperature of -35 °C to +75 °C, with storage from -40 °C to +85 °C. Board dimensions are 30.0 x 51.0 x 4.9 mm (W x L x H).ApplicationsM2M communicationIoT applicationsBroadband IoT devicesRemote devices in areas without 4G or 3G coverage

The FN990A28 CR is a 5G/LTE data card module in the standard M.2 form factor, aimed at engineers building M2M and IoT equipment that needs cellular connectivity on a compact board-level module.It implements 3GPP Release 16 and supports both 5G NSA and 5G SA operation, together with EN-DC. Because it remains backward compatible with existing GSM/GPRS networks, it can be specified where legacy coverage is still part of the deployment.Peak rates are 3.4 Gbps DL / 0.46 Gbps UL in 5G NSA and 2.5 Gbps DL / 0.90 Gbps UL in 5G SA. The module operates from -40 °C to +85 °C and is rated for RED, FCC, CCC, RoHS and WEEE.ApplicationsM2M applicationsIoT applications

The G-4510 CR is a power-saving programmable automation controller designed for unattended remote sites where mains power is unavailable. Its built-in solar charger manages a 12 V lead-acid battery, so the unit can run from solar power in the field.The G-4510 CR combines 8 analogue inputs (0 ~ 20 mA, 12-bit) with 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. An Ethernet port and RS-232 and RS-485 COM ports allow it to connect to local equipment and to a host system. Optional 4G and NB modules support wireless data transmission, and an optional GPS module adds 32-channel tracking.Typical deployments include hydrologic and wind monitoring, mudslide monitoring, and vehicle or maritime tracking. The unit is DIN-rail or wall mountable in a metal casing rated for -20 ~ +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime GPS tracking systems

The G-4510D CR is a Mini-PAC for remote, battery-powered machine-to-machine sites where mains power is unavailable or impractical. Its built-in solar charger manages a 12 V lead-acid battery, and low-voltage disconnect and reconnect thresholds protect the battery from deep discharge. The ordering code adds the LCD display to the base G-4510 specification.The unit combines 8 current analogue inputs, 3 dry-contact digital inputs, 3 open-collector digital outputs and a Form C relay output with an RJ-45 Ethernet port and both RS-232 and RS-485 serial ports. Optional 4G (EC21-AU or EC25-E) or NB (BG96) modules provide wireless data transmission, and an optional GPS module with 32-channel All-In-View tracking supports vehicle or maritime position tracking.The embedded MiniOS7 operating system includes anti-virus protection, and TCP and UDP client connections are supported over 4G LTE. The device is built into a metal casing, is rated for -20 ~ +70 °C operation and mounts on DIN-rail or wall.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime GPS tracking

G-4514-4GAU is a power-saving programmable automation controller for remote, unattended sites where mains power and fixed networking are unavailable. It combines a cellular transceiver with a solar charger for 12V lead-acid batteries, so it can run as a self-contained data logging and control node.The controller runs an embedded MiniOS7 with anti-virus protection and supports GSM, WCDMA and 4G LTE connectivity, with TCP and UDP client connections over 4G LTE. On the wired side it provides a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 COM ports and SD card support. Its I/O set comprises 8 current-type analog inputs (0 ~ 20 mA), 3 dry-contact digital inputs, 3 open-collector digital outputs and one Form C relay output.Built-in real-time clock, NVRAM and EEPROM for timestamped data and retained settingsMetal DIN-rail or wall-mount housing rated for -20 ~ +70 °C operationRegional variant for Asia only, except ChinaApplicationsHydrologic monitoringMudslide monitoringWind monitoringVehicle monitoring and tracking

G-4514-4GC CR is a power saving PAC with a built-in 4G cellular transceiver and a solar charger for lead-acid batteries, designed for unattended M2M monitoring in remote locations where mains power is not available.The unit combines an 80 MHz processor, embedded MiniOS7 with anti-virus support, and I/O covering 8 analog inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and a Form C relay. Connectivity includes GSM, WCDMA and 4G LTE, a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and SD card support. TCP and UDP client connections are supported over 4G LTE.The listed variant is marketed for Asia only. Optional 128 x 64 dot LCM display and 32-channel GPS with All-In-View tracking are available on the wider G-4514 series and can suit vehicle or maritime tracking as well as hydrological monitoring.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking (with optional GPS)

G-4514D-4GAU CR is a cellular programmable automation controller for remote sites where mains power and fixed wiring are not practical. It combines a GSM/WCDMA/4G LTE transceiver with a solar charger for lead-acid batteries, so it can run unattended on a small solar installation. The D variant adds a 128 x 64 dot LCM display for local status viewing.The controller provides 8 current analogue inputs (0 ~ 20 mA), 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. Serial communication is available through RS-232 (COM1) and RS-485 (COM2), while a 10/100Base-T(X) RJ-45 port connects the unit to a local network. The embedded MiniOS7 runtime and TCP/UDP client support over 4G LTE make it suitable for logging and forwarding field data from distributed sites.Built for harsh environments, the metal housing mounts on a DIN rail or wall. The listed operating range is -15 ~ +55 °C. This ordering code is intended for sale in Asia, excluding China.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and tracking

The G-4514D-4GC CR is a power saving programmable automation controller with an integrated cellular transceiver, built for remote M2M monitoring where mains power is limited. Its solar charger for 12V lead-acid batteries lets it run from a small solar installation, and the LCD display provides on-site status. This variant uses the frequency band for China and is intended for Asia only.The controller combines 8 analogue inputs (0 ~ 20 mA, 12-bit), 3 digital inputs, 3 open-collector digital outputs and a Form C relay output, so it can read field sensors and switch local equipment. Communication options include a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and TCP/UDP client connections over 4G LTE. The unit runs an embedded MiniOS7 with anti-virus protection and supports SD card storage.Typical deployments include hydrologic and wind monitoring, as well as vehicle monitoring and tracking systems. The metal housing is DIN-rail or wall mountable, with an operating temperature range of -15 ~ +55 °C.ApplicationsHydrologic monitoringWind monitoringCar monitoring and tracking systems

4G Power Saving PAC with Solar charger and GPS. (Asia Only, Except China).

The G-4514P-4GC CR is a power-saving PAC for remote field sites that depend on battery and solar power. It combines a cellular transceiver with a solar charger for a 12 V lead-acid battery, so it can run unattended on a monitoring or tracking installation.Eight 0 to 20 mA analogue inputs, three digital inputs, three open-collector digital outputs and a Form C relay output cover common sensor and actuator wiring. Ethernet, RS-232 and RS-485 ports let it connect local devices to the cellular network, with TCP and UDP client connections over 4G LTE. The GPS option, with 32-channel All-In-View tracking, adds position data for vehicle or maritime use.A built-in real-time clock, NVRAM, EEPROM and watchdog timer support timekeeping and reliable operation, and SD card support adds storage. The metal housing mounts on DIN-rail or wall and is rated for -20 to +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime tracking systems

4G Power Saving PAC with Solar charger, LCD display and GPS. (Asia Only).

The G-4514PD-4GC CR is a power-saving programmable automation controller with a built-in cellular transceiver and solar charger. It suits unattended sites that rely on battery power and need to report sensor data over a 4G LTE connection, such as hydrologic or wind monitoring stations.This ordering code is specified with an LCD display and a 32-channel GPS receiver, and is tuned for the Chinese frequency bands (Asia only). The GPS option allows the unit to act as a tracking node for vehicle or maritime applications, while the display gives on-site status information.Embedded MiniOS7 with anti-virus protectionCellular connectivity across GSM, WCDMA and 4G LTE with TCP and UDP client connectionsLead-acid battery charging with low-voltage disconnect at 11.1 V and reconnect at 12.6 V8 analogue current inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and 1 relay outputApplicationsHydrologic monitoringWind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking systems

GAM-100 CR is a Bluetooth Low Energy (Bluetooth 4.0) gauge master that connects Mitutoyo gauges via their SPC interface. A smartphone or tablet can then receive measurement data wirelessly through the unit, without a cable run to the gauge.The unit has a built-in micro USB rechargeable Li-ion battery, rated at 100 hours at a 10 Hz transmission rate. Transmission rates of 1, 2, 5 and 10 Hz are selected in the Android app, which is also used for gauge data acquisition and configuration. Measurements can be logged with the trigger button or a 3.5 mm foot switch, in single or continuous trigger mode.Data can be kept in local memory on the mobile device or uploaded to a remote MySQL server. Status is shown by LEDs for battery, RF link and charging.ApplicationsWireless dimensional measurement with Mitutoyo gaugesLogging gauge measurements to a mobile deviceUploading measurement data to a remote MySQL serverQuality control and statistical process control data collection

The GPS-721 CR is a DIN-rail GPS receiver module for remote positioning and timing. It tracks 66 GPS channels and outputs NMEA 0183 v3.01 data at 9600 bps, while its RS-485 port works with the DCON protocol and its RS-232 port can use either NMEA or DCON. This lets it sit on a serial network or feed a single host directly.Beyond position data, the module provides a 1 PPS output, with a default 100 ms pulse each second, for precise timekeeping and time measurement. It also includes one non-isolated open-collector digital output (sink type), so the PPS function can serve as a time synchronisation source alongside the serial interfaces. Status LEDs show power and communication along with three GPS indicators.The unit accepts 10 to 30 VDC with reverse polarity protection and operates from -25 to +75 °C. The ordering code includes a 5 m GPS antenna (ANT-115-03). Per the source listing, this ordering code is marked Asia only, and the module carries FCC, RoHS and WEEE certification marks.ApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement