Berøringsskjermer

The TP-2070 CR is a 7-inch panel mount touch monitor for engineers who need a local operator display with a resistive touch interface. It combines an 800 x 480 LCD with LED backlighting and a 4-wire analogue resistive touch layer, so it can be operated with a stylus or gloved finger in environments where capacitive panels are less suitable.The CR variant is the RS-232 or USB version with power supply, as listed in the ordering information. The front panel is rated IP65 and the unit is specified for operation from -20 ~ +70 °C. It can be mounted in a panel cut-out or on a VESA 75 mm x 75 mm bracket, and on-screen display controls allow brightness, contrast and image alignment to be adjusted without a PC.The monitor is guaranteed to work with ICP DAS PAC control systems, including the WP-5000 series, LinPAC series and XP-9000 series. Software support covers Windows, Windows IoT, WES, WinCE and Linux. The unit carries CE, UKCA, FCC, RoHS and WEEE marking.ApplicationsLocal operator interface for ICP DAS PAC control systems such as WP-5000, LinPAC and XP-9000 seriesPanel-mounted HMI display in industrial control cabinets and machine front panels

TP-2070/NP CR is a 7-inch panel mount touch monitor for operator interfaces in industrial control cabinets and machine panels. It pairs an 800 x 480 LED-backlit LCD with a 4-wire analogue resistive touch layer, so it can be operated with a finger, glove or stylus.The front panel is rated IP65 and the unit is specified for operation from -20 to +70 °C. On-screen display controls cover brightness, contrast, clock, phase, horizontal and vertical position and sharpness. Driver support is listed for Windows, Windows IoT, WES, WinCE and Linux.This ordering code is the version without a power supply. The unit accepts +12 ~ 48 VDC input and includes one RS-232 (combo) port and one USB port. It is guaranteed to work with ICP DAS PAC control systems such as the WP-5000 series, LinPAC series and XP-9000 series.ApplicationsOperator panels and HMI displays for ICP DAS PAC control systemsPanel-mounted monitoring and control in industrial cabinetsMachine control interfaces using Windows, WinCE or Linux software

The TP-3080 CR is an 8.4-inch LCD touch monitor for operator interfaces on industrial machines and control cabinets. It pairs an 800 x 600 display with a 5-wire analogue resistive touch layer, so it can be operated with a finger, a gloved hand or a stylus. The CR variant ships with a power supply and a touch interface of RS-232 or USB, as set out in the ordering description.The front panel is rated IP65 and the display is adjusted through full-function on-screen display controls covering brightness, contrast, clock, phase, horizontal and vertical position, and sharpness. Two LED indicators show power and display status. Installation is possible with panel mounting or VESA mounting at 75 mm x 75 mm or 100 mm x 100 mm.Driver support is listed for Windows, Windows IoT, Windows Embedded Standard, Windows Embedded Compact (WinCE) and Linux. The unit is specified for an operating range of -20 ~ +70 °C and a 12 ~ 48 VDC supply input, making it suitable as a local HMI for ICP DAS PAC controllers such as the WP8000 series, LinPAC series and XP-9000 series.ApplicationsLocal operator interface (HMI) for ICP DAS PAC control systems such as the WP8000, LinPAC and XP-9000 seriesPanel-mounted touch operator stations in control cabinets and machine enclosures

TP-3080/NP CR is an 8.4-inch panel mount touch monitor with an 800 x 600 LCD, a resistive touch panel and an LED backlight, suited to operator interfaces on industrial control panels and machine enclosures.The front panel is rated IP65 and the unit operates from -20 ~ +70 °C. Full-function OSD controls cover brightness, contrast, clock, phase, horizontal and vertical position and sharpness. Software support covers Windows, Windows IoT, WES, WinCE and Linux. The monitor is designed to pair with ICP DAS PAC control systems such as the WP8000 series, LinPAC series and XP-9000 series.This variant is sold without a power supply. The unit is specified for +12 ~ 48 VDC input at 7.0 W, so a suitable DC source must be provided separately.ApplicationsOperator interface panels for ICP DAS PAC control systemsPanel-mounted HMI displays in industrial control cabinets

The TP-4100 CR is a 10.4-inch panel mount touch monitor built around an 800 x 600 TFT LCD with LED backlighting. Its resistive touch panel and full on-screen display (OSD) menu make it a practical choice for panel-mounted operator interfaces where a simple, durable touch surface is required.The CR variant is supplied with a power supply and a combined RS-232 port, with one USB port also fitted. The rugged aluminium front bezel carries an IP65-rated front panel, and the unit operates across a wide temperature range of -20 ~ +70 °C. Installation can be made by panel mounting or by VESA mounting on a 75 x 75 pattern.The monitor is intended for use with ICP DAS PAC control systems, including the WP-8000 series, LinPAC series and XP-9000 series. Drivers are provided for Windows, Windows IoT, Windows Embedded Standard, Windows Embedded Compact and Linux.ApplicationsOperator interfaces and HMI displays for panel-mounted installationsFront-end displays for ICP DAS WP-8000, LinPAC and XP-9000 series PAC systemsIndustrial control cabinets and machine front panels requiring touch input

The TP-4100/NP CR is a panel-mount touch monitor built around a 10.4" LCD with an 800 x 600 resolution and a 5-wire analog resistive touch panel. It gives an engineer a simple local operator interface that connects over RS-232 or USB, with OSD controls for brightness, contrast, clock, phase, position and sharpness.This variant is supplied without a power supply. It accepts a +12 ~ 48 VDC input, so the designer can use an existing DC supply within that range. The front panel is rated IP65, and the unit mounts either into a panel cut-out or on a VESA 75 x 75 mounting pattern.Driver support covers Windows, Windows IoT, Windows Embedded Standard, Windows Embedded Compact (WinCE) and Linux. The source states that the monitor is compatible with ICP DAS PAC controllers, including the WP-8000 series, LinPAC series and XP-9000 series.ApplicationsPanel-mounted operator interface (HMI) for control cabinetsFront-end display for ICP DAS WP-8000, LinPAC and XP-9000 controllers

The TP-5120 CR is a panel mount touch monitor for operator interfaces on industrial control systems. It combines a 12.1-inch LCD with a 5-wire analogue resistive touch panel, so it can be operated with a finger, stylus or gloved hand where a capacitive screen would not respond.This ordering code includes the RS-232 or USB touch interface and a power supply. The front panel is rated IP65 and the operating range extends from -20 to +70 °C, which suits control cabinets and machine panels in harsher settings. The on-screen display lets you adjust brightness, contrast, clock, phase, horizontal and vertical position, and sharpness directly on the unit.Driver support covers Windows, Windows IoT, Windows Embedded Standard, WinCE and Linux. The manufacturer states that the monitor is guaranteed to work with ICP DAS PAC controllers, including the WP-5000 series, LinPAC series and XP-9000 series.ApplicationsOperator panels and HMI displays for PAC-based control systemsMachine and control cabinet front panelsIndustrial touch interfaces for Windows, Linux or WinCE applications

The TP-5120/NP CR is a 12.1-inch panel-mount touch monitor for operator interfaces. It pairs an 800 x 600 LED-backlit display with a 5-wire analogue resistive touch layer, so it can be operated with a finger, stylus or gloved hand.The front panel is rated IP65 and the unit is specified for operation from -20 to +70 °C. Full-function on-screen display controls cover brightness, contrast, clock, phase, horizontal and vertical position and sharpness, so the display can be tuned on site without a host computer.Connectivity is provided by one RS-232 combo port and one USB port. Drivers are listed for Windows, Windows IoT, WES, WinCE and Linux. The /NP suffix denotes the variant without a power supply, so a separate +12 ~ 48 VDC source is required. The source data notes that the TP-5120 is intended for use with ICP DAS PAC controllers, including the WP-5000 series, LinPAC series and XP-9000 series.ApplicationsOperator panels and HMI front ends for industrial control cabinetsDisplays for ICP DAS PAC control systems such as WP-5000, LinPAC and XP-9000 series

TP-6150 CR is a 15" TFT LCD touch monitor for panel mounting, suited to operator interface work on industrial control systems. It provides 1024 x 768 resolution, a 5-wire analog resistive touch panel and an operating range of -20 ~ +70 °C.This CR variant is supplied with RS-232 or USB touch connectivity and its power supply. It accepts +12 ~ 48 VDC input, and the front panel is rated IP65, which is useful where the display sits in a dusty or wet environment.Full-function OSD controls adjust brightness, contrast, clock, phase, horizontal and vertical position and sharpness. The manufacturer names the WP8000, LinPAC and XP-9000 series as compatible PAC controllers, with drivers listed for Windows, Windows IoT, WES, WinCE and Linux.ApplicationsOperator panels and HMI on industrial control systemsTouch-based control and monitoring with ICP DAS PAC controllersPanel-mounted machine control and monitoring installations

TP-6150/NP CR is a 15-inch TFT LCD touch monitor for panel mounting, aimed at operator interfaces on industrial control systems. It combines a 1024 x 768 display with a resistive touch panel and an IP65-rated front panel, and it can be installed in a panel cut-out or on a VESA 75 mm or 100 mm mounting pattern.The NP suffix indicates the variant without a power supply, so a +12 to 48 VDC supply must be provided separately. The unit includes a single RS-232 port (combo) and one USB port, and its on-screen display allows brightness, contrast, clock, phase, position and sharpness adjustments. The manufacturer states that the monitor works with ICP DAS WP8000, LinPAC and XP-9000 series PAC controllers.Driver support covers Windows, Windows IoT, Windows Embedded Standard, Windows Embedded Compact, and Linux. The operating range is -20 to +70 °C, and the unit carries CE, UKCA, FCC, RoHS and WEEE declarations.ApplicationsOperator panels and HMI for PAC-based control systemsPanel-mounted machine and process control stationsTouch-operated monitoring in harsh or temperature-variable environments

TP-7170 CR is a 17-inch TFT LCD touch monitor for panel-mounted operator interfaces. It pairs a 1280 x 1024 display with a 5-wire analog resistive touch panel and on-screen display (OSD) controls for brightness, contrast, clock, phase, position and sharpness.The front panel is rated IP65 and has a rugged aluminium bezel. The unit accepts +12 ~ 48 VDC, operates from -20 ~ +70 °C and provides one RS-232 (combo) port and one USB port. The ordering code includes a power supply.The manufacturer states compatibility with ICP DAS PAC controllers, including the WP8000 series, LinPAC series and XP-9000 series. Driver support is listed for Windows, Windows IoT, WES, WinCE and Linux.ApplicationsOperator panels and HMI in industrial control cabinetsFront-panel displays for ICP DAS PAC control systems

The TP-7170/NP CR is a panel mount touch monitor built around a 17-inch TFT LCD with 1280 x 1024 resolution and a 5-wire analogue resistive touch layer. It suits operator interfaces that need a rugged front bezel, front-panel IP65 protection and a wide -20 ~ +70 °C operating range.The /NP suffix identifies the variant without a power supply, so a separate +12 ~ 48 VDC source is required (consumption 22.0 W). The unit provides one RS-232 combo port and one USB port, and the on-screen display covers brightness, contrast, clock, phase, position and sharpness adjustment.ICP DAS states that the TP-7170 is guaranteed to work with its PAC control systems, including the WP8000, LinPAC and XP-9000 series. Driver support is listed for Windows, Windows IoT, WES, WinCE and Linux.ApplicationsOperator panels for PAC-based control systemsPanel-mounted HMI where front-panel IP65 protection is required

The TPM-4100 CR is a panel-mount touch monitor for operator interfaces in industrial control cabinets. It combines a 10.4-inch LCD with a resistive touch panel, so it can be used with gloves or a stylus, and it adds on-screen display controls for setting the image without a PC.Its aluminium front bezel carries an IP65-rated front panel. The unit is specified for operation from -20 ~ +70 °C and is designed to run with Windows, Windows IoT, WES, WinCE and Linux drivers. It is supplied with a power supply and is intended for pairing with ICP DAS PAC control systems such as the WP-8000, LX-8000 and XP-9000 series.The CR ordering code is the variant with RS-232 or USB connectivity, as listed in the ordering information. Engineers specifying a panel display for a PAC-based control system will find the wide temperature range and sealed front panel the key selection points.ApplicationsOperator interfaces and HMI panels in industrial control cabinetsFront-end displays for ICP DAS PAC control systems such as WP-8000, LX-8000 and XP-9000 series

The TPM-4100/NP CR is a 10.4" panel mount touch monitor for operator interfaces. It pairs an 800 x 600 LCD with a 4-wire analogue resistive touch panel, so it can be operated by touch, and it has a front panel rated IP65.This variant is supplied without a power supply, unlike the TPM-4100 CR. The input range is +12 ~ 48 VDC, so the unit needs a suitable external DC source. The display runs on Windows, Windows IoT, WES, WinCE and Linux, and the source states that it is guaranteed to work with ICP DAS PAC control systems including the WP-8000, LX-8000 and XP-9000 series.Setup is handled through full-function on-screen display controls for brightness, contrast, clock, phase, horizontal and vertical position and sharpness. The unit offers one RS-232 (combo) port and one USB port, and is rated for operation from -20 ~ +70 °C.ApplicationsOperator interfaces for machine and process controlPanel-mounted HMI in industrial control cabinetsTouch-based monitoring with ICP DAS PAC control systems