Multifunksjons-DAQ

The A-812PG is an ISA bus multifunction board for PC/AT compatible computers. It combines 16 single-ended 12-bit analogue inputs, two 12-bit analogue outputs, 16 digital inputs and 16 digital outputs on one card, so engineers can handle acquisition, voltage output and TTL-level digital I/O in a single slot.Analogue inputs sample at up to 62.5 kS/s with software programmable gain of 1, 2, 4, 8 and 16. Acquisition can be started by software, pacer, external or event triggers, and data can be moved by polling, interrupt or DMA. A timer/counter channel is also included.The A-812PG CR is the RoHS-labelled ordering option of this board. Listed certifications are CE, UKCA, FCC, RoHS and WEEE, and the operating temperature range is 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The A-821PGH CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines a fast analogue input stage, a single analogue output channel and TTL-level digital I/O on one card, which suits engineers who need signal capture and simple control from a single slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, sampling at up to 45 kS/s. The PGH version offers software-programmable gains of 1, 10, 100 and 1000, with input ranges of ±5 V, ±0.5 V, ±0.05 V and ±0.005 V. Triggering is available by software or pacer, with data transfer by polling or interrupt. A 16-bit timer/counter channel is also provided.Connection is through a 37-pin D-Sub connector, and the CA-4002 D-Sub connector is included with this ordering code. The board is rated for an operating temperature of 0 ~ +60°C and carries CE, UKCA, FCC and WEEE marks.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

The A-821PGH/S CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines 16 single-ended or 8 differential analogue inputs with one 12-bit analogue output, 16 digital inputs and 16 digital outputs, and a 16-bit timer/counter channel, all on one board.The analogue inputs sample at up to 45 kS/s and support software, pacer, external and event triggering. Data can be transferred by polling, interrupt or DMA, which suits both simple monitoring and time-critical acquisition. The A-821PGH variant of this series offers software-programmable gains of 1, 10, 100 and 1000.This ordering code is supplied with a DB-8225 terminal board and a CA-3710 D-Sub cable, rather than the CA-4002 D-Sub connector listed for the base A-821PGH. The board carries CE, UKCA, FCC and WEEE marks and operates from 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

The A-821PGL is a 12-bit ISA bus multifunction board for engineers who need analogue acquisition, analogue output and digital I/O in a single PC expansion card. It provides 16 single-ended or 8 differential analogue inputs sampling at up to 45 kS/s, making it suited to signal analysis and transient capture.The low gain version offers software programmable gains of 1, 2, 4 and 8 for the analogue input channels. Several trigger sources are available, including software, pacer, external and event triggers, and data can be moved by polling, interrupt or DMA. The board also includes an analogue output with 0 ~ 5 V and 0 ~ 10 V ranges, along with 16 digital inputs and 16 digital outputs at 5 V/TTL levels and one 16-bit timer/counter channel.This ordering code includes one CA-4002 D-Sub connector for field wiring. The board is specified for an operating temperature of 0 ~ +60 °C.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The A-821PGL/S CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines 16 single-ended or 8 differential analogue inputs, an analogue output with 0 ~ 5 V and 0 ~ 10 V ranges, and 16 digital inputs and 16 digital outputs on a single card, which suits engineers who need mixed analogue and digital I/O in one PC slot.The A-821PGL version provides software programmable gains of 1, 2, 4 and 8 on the analogue inputs, with a maximum sampling rate of 45 kS/s. Several trigger modes (software, pacer, external and event) and data transfer modes (polling, interrupt and DMA) allow the acquisition to be matched to the timing needs of the application.The listing for this ordering code includes a DB-8225 terminal board and a CA-3710 D-Sub cable, giving a ready-to-wire option for connecting field signals to the board.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

A-823PGH CR is a 12-bit multifunction analogue and digital I/O board for PC/AT compatible computers with an ISA bus. It combines a 16-channel analogue input section, two analogue output channels, and 16 digital inputs and 16 digital outputs on a single card, which suits engineers who need mixed signal acquisition and control in one slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, and the A-823PGH variant offers a high programmable gain set from 0.5 to 1000. Acquisition supports software, pacer, external and event triggering, with data transfer by polling, interrupt or DMA. DMA level (1 or 3) and interrupt line (between 3 and 15) are set by jumper.The board ships with one CA-4002 D-Sub connector and uses a 37-pin D-Sub connector on the card. It is listed with CE, UKCA, RoHS and WEEE certification.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT & frequency analysisTransient analysisProduction testProcess control

A-823PGH/S is a PC/AT compatible ISA bus data acquisition board that combines analogue input, analogue output and digital I/O on a single card. It suits engineers who need to capture fast analogue signals and control or monitor digital lines from one slot.The analogue inputs can be configured as 16 single-ended or 8 differential channels, with 12-bit resolution and a maximum sampling rate of 125 kS/s. The PGH variant offers software-programmable gains of 0.5, 1, 5, 10, 50, 100, 500 and 1000. Two 12-bit analogue output channels support several voltage ranges, including unipolar and bipolar settings with an external reference option.Acquisition can be started by software, pacer, external or event triggers, and data can be moved by polling, interrupt or DMA. The board also provides 16 DI and 16 DO channels, with a 37-pin D-Sub connector for field wiring.ApplicationsSignal analysisIndustrial automationLaboratory automationSensor interfaceFFT and frequency analysisTransient analysisProduction testProcess control

The ISO-813 CR is an ISA bus data acquisition board for PC/AT compatible computers. It provides 32 single-ended analogue input channels with a 12-bit A/D converter, and its 3000 Vrms isolation makes it suited to electrically demanding industrial installations.Engineers will find the board useful for voltage measurement across a range of bipolar and unipolar input spans, with programmable gain and software-triggered acquisition using polling data transfer. It is backward compatible with the 813 family, which may simplify migration of existing software.Typical uses include programmable voltage sources, programmable current sinks, harsh environment operation and process control.The ordering code ISO-813 CR is listed as phased out. The similar ISO-813/S is noted in the source data for reference.ApplicationsProgrammable voltage sourceProgrammable current sinkHarsh environment operationProcess control

The ISO-813/S CR is a bus-type, isolated 12-bit analogue input board for PC/AT compatible computers. It provides 32 single-ended channels, programmable gain and software-triggered polled acquisition, making it suited to engineers adding isolated analogue measurement to an ISA-based system.Isolation is rated at 3000 Vrms through a built-in DC/DC converter, which protects the host computer from the signal side in electrically noisy or demanding environments. Input ranges run from ±10 V down to ±0.625 V bipolar and 0 ~ 10 V down to 0 ~ 0.3125 V unipolar, with gains from 0.5 to 16. The board is backward compatible with the 813 family.This /S variant is supplied with a DB-8325 terminal board and a CA-3710 D-Sub cable, according to the price list. Operating temperature is 0 ~ +60 °C, with storage between -20 and +70 °C and humidity of 5 to 85% RH, non-condensing.ApplicationsProgrammable voltage sourceProgrammable current sinkHarsh environment operationProcess control

The ISO-AD32L is a bus-type isolated 12-bit A/D board for PC/AT compatible computers. It offers 32 single-ended or 16 differential analogue input channels, with a maximum sampling rate of 200 kS/s. The low-gain (L) version suits engineers who need isolated multi-channel acquisition in a single ISA slot.An on-board 1024-sample FIFO supports gap-free A/D conversion, quoted at 200 kS/s for a single channel and 100 kS/s when scanning channels. Channel selection, gain, input type and operating mode are set in software, so board parameters can be changed without hardware adjustment. The board uses polled data transfer.Isolation is provided by a built-in DC/DC converter rated at 1000 VDC, with 5000 Vrms photo-isolation protection and inputs that tolerate up to 500 Vrms common-mode voltage. The CA-4002 D-Sub connector is included with the board.ApplicationsData acquisitionWaveform analysisHarsh environment operationSignal isolation

ISO-AD32L/S is a bus-type isolated 12-bit analogue input board for PC/AT compatible computers with an ISA slot. It offers 32 single-ended or 16 differential channels, a maximum sampling rate of 200 kS/s and an on-board 1024-sample FIFO that supports gap-free conversion.Channel selection, gain, input type and operating mode are all set in software, so the board suits engineers who need to scan channels with automatic gain control rather than rewire inputs. The built-in DC/DC converter provides 1000 VDC isolation, and the inputs tolerate up to 500 Vrms of common-mode voltage, which makes the board relevant to signal isolation in noisy or harsh environments.This variant ships with a DN-37 terminal board and a CA-3710 D-Sub cable, so it is ready to wire to field signals. The board carries CE, UKCA, FCC and WEEE marks and is rated for 0 ~ +60 °C operation.ApplicationsData acquisitionWaveform analysisHarsh environment operationSignal isolation

PCI-1002HU CR is the high-gain, 44 kS/s variant of the PCI-1002 series, a universal PCI multifunction board for acquiring analogue signals alongside digital I/O on a PC. Its 3.3 V/5 V universal PCI interface suits a wide range of host systems, and it supports Card ID via an SMD switch for identifying cards in multi-board setups.The analogue front end offers 32 single-ended or 16 differential channels at 12-bit resolution, with gains of 1, 10, 100 and 1000 and bipolar ranges from ±10 V down to ±0.01 V. Sixteen 5 V/TTL digital inputs with pull-high and pull-low resistors let an unconnected or interrupted input be given a defined state, and sixteen 5 V/TTL digital outputs are available for control tasks. The board includes one CA-4002 D-Sub connector.Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for a range of development languages, including C#.NET, Visual Basic.NET and LabVIEW, to help users build their own applications.ApplicationsLaboratory automationProduction testSensor interface

The PCI-1002HU/S CR is a universal PCI multifunction data acquisition board for engineers who need a 32-channel, 12-bit analog input at up to 44 kS/s alongside 16 TTL digital inputs and 16 TTL digital outputs. It works in both 3.3 V and 5 V PCI slots, and its high-gain input range suits low-level signals. This variant is supplied with a CA-3710 D-Sub cable.Analog inputs can be configured as 32 single-ended or 16 differential channels, with gains of 1, 10, 100 and 1000 and bipolar ranges from ±10 V down to ±0.01 V. Triggering can be done by software, an internal programmable pacer or an external 5 V/TTL signal, and data can be transferred by polling or interrupt. The digital inputs include pull-high and pull-low resistors, so a channel holds a defined state when it is disconnected or interrupted.The board is supported by a DLL, an ActiveX control and sample programs for a range of languages and operating systems, including Linux, DOS and Windows. The PCI-1002LU/HU is positioned as a replacement for the PCI-1002L/H without changes to software or drivers. The operating temperature range is 0 ~ +60°C.ApplicationsLaboratory automationProduction testSensor interface

PCI-1002LU CR is a universal PCI data acquisition board for engineers who need a 12-bit analogue input front end with digital I/O on the same card. It supports both the 3.3 V and 5 V PCI bus and provides 32 single-ended or 16 differential analogue input channels, sampled at up to 110 kS/s with the low-gain range.The card also includes 16 digital input channels and 16 digital output channels, all 5 V/TTL. The pull-high and pull-low resistors on the digital inputs let the status be predefined when a channel is disconnected or interrupted, rather than floating. It is offered as an easy replacement for the PCI-1002L/H, with no modification to existing software or driver required.Driver support covers Linux, DOS and Windows, with a DLL and ActiveX control. Sample programs are provided for a range of C/C++, Delphi, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW environments. This ordering code includes one CA-4002 D-Sub connector.ApplicationsLaboratory automationProduction testSensor interface

PCI-1002LU/S CR is a 3.3 V/5 V universal PCI multifunction data acquisition board for engineers who need fast analog input alongside digital I/O in a PC. The LU variant uses low-gain analog input at up to 110 kS/s, and the board is positioned as a direct replacement for the PCI-1002L/H, with no software or driver changes required.The board provides 32 single-ended or 16 differential 12-bit analog input channels, 16 digital inputs and 16 digital outputs, all at 5 V/TTL levels. Pull-high and pull-low resistors on the DI channels let the input state be defined when a channel is disconnected or interrupted, rather than floating.This order code includes a CA-3710 D-Sub cable. Drivers and a DLL with ActiveX control are provided for Linux, DOS and Windows, with sample programs for several C/C++, Delphi, Visual Basic, C# and LabVIEW environments.ApplicationsLaboratory automationProduction testSensor interface

PCI-1202HU CR is a universal PCI multifunction data acquisition board for engineers who need gap-free analogue capture at up to 44 kS/s on a PC. It provides 32 single-ended or 16 differential 12-bit analogue inputs, two analogue outputs, and 16 channels each of 5 V/TTL digital input and output, all on one card.This HU variant is the 44 kS/s model with the 1K-word FIFO. Compared with the 110 kS/s LU version, it trades sampling speed for finer input ranges, down to ±0.005 V full scale in its bipolar settings. The 8K-FIFO versions are the choice where buffering matters more than the single-card cost. The card supports the 3.3 V and 5 V PCI bus and includes a CA-4002 D-Sub connector.The board offers software, internal pacer and external 5 V/TTL triggering, with a Magic Scan controller and continuous capture for demanding acquisition tasks. Digital inputs include pull-high and pull-low resistors, and a 4-bit Card ID switch helps identify boards in multi-card systems.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O ports

PCI-1202HU/S CR is a universal PCI data acquisition board for engineers who need high-speed, 12-bit analog input with digital I/O on one card. It sits on either a 3.3 V or 5 V PCI bus and offers 32 single-ended or 16 differential analog input channels sampled at up to 44 kS/s, with the 8K word FIFO buffering data during busy multitasking operation.Compared with the CR variants supplied with a CA-4002 D-Sub connector, this ordering code includes a DB-1825 daughter board. The card also provides two analog output channels, 16 digital inputs with pull-high and pull-low resistors, and 16 digital outputs at 5 V/TTL levels. Software, internal programmable pacer and external triggers are supported, and a Card ID switch helps identify boards in multi-card systems.Typical uses include high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port

The PCI-1202LU CR is a universal PCI data acquisition board for engineers who need fast 12-bit analogue input in a PC. It offers 32 single-ended or 16 differential inputs sampling at up to 110 kS/s, with a 1024-sample FIFO to buffer data between the board and the host.Beyond analogue input, the board provides 2 analogue outputs, 16 TTL/5 V digital inputs with pull-high and pull-low resistors, 16 TTL/5 V digital outputs, and three 16-bit timer/counter channels. Software, internal pacer and external 5 V/TTL triggering are supported, with data transferred by polling.This ordering code is the low-gain 110 kS/s variant with the 1K-word FIFO. The HU version samples at 44 kS/s for high-gain work, and the /8K versions add an 8K-sample FIFO. The board is supplied with one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port

PCI-1202LU/8K CR is a 12-bit PCI data acquisition board for engineers who need fast, gap-free sampling inside a PC. It offers 32 single-ended or 16 differential analog inputs sampled at up to 110 kS/s, with an 8K-word hardware FIFO that helps prevent data overflow when the host is busy with other tasks under Windows or Linux.The universal PCI interface works in both 3.3 V and 5 V bus slots. The board includes 16 digital inputs with pull-high and pull-low resistors, 16 digital outputs at 5 V/TTL levels, and two analog outputs. Acquisition can be started by software, the internal programmable pacer or an external 5 V/TTL trigger, with MagicScan control and continuous capture support. A four-bit Card ID switch helps identify boards in multi-card systems.The package includes one CA-4002 D-Sub connector. The board is suited to high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1202LU/S CR is a universal PCI multifunction data acquisition board for high-speed analogue input work in PC-based systems. It provides 32 single-ended or 16 differential analogue inputs with 12-bit resolution, sampled at up to 110 kS/s, together with 2 analogue outputs and 16 digital inputs and 16 digital outputs, all at 5 V/TTL levels.This variant is supplied with a DB-1825 daughter board rather than the CA-4002 D-Sub connector, and uses the 8 K word FIFO listed in its ordering information to buffer analogue samples. The board works with both 3.3 V and 5 V universal PCI slots, and the 4-bit Card ID switch helps identify boards in multi-card systems.Typical uses include high-speed data acquisition, process monitoring and control, vibration analysis, and generating digital patterns from the digital I/O port.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602FU CR is a high-speed multifunction card for PC-based data acquisition. This ordering code is the 200 kS/s version of the PCI-1602U series, sampling its 16-bit analog inputs at up to 200 kS/s and buffering results in an 8192-sample hardware FIFO, which helps when capturing fast or multi-channel signals on a host PC.The board fits Universal PCI slots and works with both 3.3 V and 5 V PCI buses. Analog inputs can be set to 32 single-ended or 16 differential channels by jumper, with programmable gain of 1, 2, 4 and 8. Alongside the analogue side, it offers a 2-channel 12-bit analog output and 16 channels each of 5 V/TTL digital input and output, with pull-high and pull-low resistors on the DI channels. The board is pin-compatible with the PCI-1602/F and does not need changes to existing software or drivers.This order includes one CA-4002 D-Sub connector. Driver support covers Linux, DOS and Windows, with a DLL and ActiveX control plus sample programs for several C, Visual Basic, C#.NET and LabVIEW environments. A Card ID switch lets software identify each card when two or more are installed in the same computer.ApplicationsHigh speed data acquisition systemProcess monitor and controlVibration analysisDigital pattern generator from digital I/O port

The PCI-1602FU/S CR is a high-speed PC-based multifunction board for engineers who need fast, multichannel analogue acquisition alongside digital I/O. Its 16-bit converter samples at up to 200 kS/s, and the 8192-sample FIFO buffers data so the host PC can keep pace with acquisition.Analogue inputs are available as 32 single-ended or 16 differential channels, with programmable gain of 1, 2, 4 and 8 and bipolar ranges from ±1.25 V to ±10 V. A built-in MagicScan controller handles multi-channel scanning, and triggering can be software, internal pacer, or external (5 V/TTL). Two 12-bit analogue outputs and 16 digital inputs and 16 digital outputs (5 V/TTL) complete the I/O set.The board fits a 3.3 V/5 V Universal PCI slot and includes a Card ID switch, so individual cards can be identified in software when two or more are installed in the same computer. It is a drop-in replacement for the PCI-1602/F with no software or driver changes, and the supplied CA-3710 D-Sub cable connects it to external signals.ApplicationsHigh-speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602U CR is a high-performance multifunction card for high-speed analogue and digital I/O on a PC. It uses the Universal PCI interface, so it runs on either a 3.3 V or a 5 V PCI bus. The 16-bit AD converter samples at up to 100 kS/s, buffered by an 8 K-sample hardware FIFO and a MagicScan controller for multi-channel scanning.The analogue inputs can be configured as 32 single-ended or 16 differential channels using jumpers, with a programmable gain of 1, 2, 4 or 8 and bipolar ranges from ±1.25 V to ±10 V. Two 12-bit analogue outputs and 16 channels each of 5 V/TTL digital input and output complete the I/O set. Pull-high and pull-low resistors on the digital inputs hold a predefined state when channels are disconnected or interrupted.A Card ID switch lets software identify this board when two or more PCI-1602U cards are installed in the same computer. Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for several development environments. This ordering code includes one CA-4002 D-Sub connector.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from the digital I/O port

The PCI-1602U/S CR is the 100 kS/s version of the PCI-1602U multifunction board. It combines a 16-bit analogue input section, a 2-channel 12-bit analogue output and 16 channels each of 5 V/TTL digital input and output on one Universal PCI card. The board supports both the 3.3 V and 5 V PCI bus, so it can be fitted in either slot type.The analogue inputs are jumper selectable between 32 single-ended and 16 differential channels, with a programmable gain of 1, 2, 4 or 8. An 8192-sample hardware FIFO and a MagicScan controller for multi-channel scanning support high-speed acquisition. The onboard Card ID switch lets software identify each board when two or more cards are installed in the same computer.This board is fully compatible with the PCI-1602/F and can be used as a direct replacement without changes to software or driver. A DLL, an ActiveX control and sample programs for several languages are provided, and the card supports Linux, DOS and Windows. The order includes one CA-3710 D-Sub cable.ApplicationsHigh speed data acquisition systemsProcess monitoring and controlVibration analysisDigital pattern generation from digital I/O port