Managed svitsjer

The FSM-510G-2F CR is a Layer 2 Plus managed switch for Ethernet networks that need Gigabit copper ports, fibre uplinks and centralised control. It combines eight RJ-45 ports at 10/100/1000 Mbps with two SFP slots for 100 or 1000 Mbps fibre modules.Configuration is available over an RS-232 console, Telnet or a web-based interface, and SNMP allows the switch to be monitored and controlled remotely. QoS, VLAN, port trunking, port security and port mirroring help engineers segment traffic, prioritise critical data and tighten access control on high-bandwidth segments.Ring redundancy with STP and RSTP provides fail-over in under 20 ms, and IGMP v1/v2/v3 snooping and proxy support keep multicast traffic under control. This ordering code includes a console cable and a wall mount kit, and the switch can be installed on a DIN rail or on a wall.ApplicationsIndustrial communication networksHigh-bandwidth Ethernet segments that require VLAN segmentation and QoS

MSM-508 CR is an 8-port Layer 2 managed Industrial Ethernet switch for control and automation networks. Its eight RJ-45 ports support 10/100Base-TX with auto negotiation and automatic MDI/MDI-X, so connections can be made without crossover cables.The switch can be configured through the RS-232 console, or over Telnet or a web browser via the Ethernet ports. Managed functions include 802.1Q tag-based VLAN, port-based VLAN, 802.1p QoS, port trunking, spanning tree, cable testing and port mirroring. Built-in Cyber-Ring technology allows several switches to be formed into a redundant ring, with copper link failures detected and recovered in approximately 20 ms.Status of the Ethernet ports can be read by SCADA systems using Modbus/TCP, Modbus/RTU or OPC. Two DC power inputs (+12 ~ +48 VDC) can be connected at the same time, with the second source taking over if the first fails, and a relay output signals power or network link failure. The unit operates from -40 °C to +75 °C.ApplicationsIndustrial control and automation networksSCADA monitoring of Ethernet port statusRedundant Ethernet ring topologies

The MSM-508FC-T CR is an 8-port Layer 2 managed industrial Ethernet switch with six RJ-45 10/100Base-TX ports and two multi-mode 100Base-FX fibre ports fitted with SC connectors. Routing data over fibre keeps the transmission path immune to EMI and RFI and isolated from electrical exposure, surges, lightning and chemical corrosion, which makes it suited to links that must stay protected.The switch can be configured through an RS-232 console port or remotely over Telnet or a web browser. Its managed feature set includes 802.1Q tag-based and port-based VLANs, 802.1p QoS, port trunking, Spanning Tree, cable testing and port mirroring. The built-in Cyber-Ring technique lets several switches form a redundant ring that recovers from a fibre or copper link failure in approximately 20 ms.Two DC power inputs from +12 VDC to +48 VDC can be connected at the same time, so the second source takes over if the first fails. A relay alarm output signals power or network link failures, and Modbus/TCP, Modbus/RTU and OPC support allow a SCADA system to monitor the status of the Ethernet and fibre ports.ApplicationsEthernet links that must be protected from electrical exposure, surges and lightningRedundant ring networks with automatic link failure recoverySCADA and remote monitoring of Ethernet and fibre port status via Modbus or OPCIndustrial automation networks requiring managed Layer 2 switching with fibre backbone links

The MSM-508FCS-60T is an industrial Layer 2 managed switch that carries Ethernet traffic over single-mode fiber, so links are immune to EMI/RFI and electrical surges. It suits runs where the transmission path must be kept electrically isolated from the plant, with reach up to 60 km on the SC fiber ports.Management is available through an RS-232 console or over Ethernet via Telnet or a web browser. Managed features include 802.1Q tag-based and port-based VLANs, 802.1p QoS, port trunking, spanning tree, cable testing and port mirroring. The built-in Cyber-Ring technique allows several switches to form a redundant ring, with recovery from a fiber or copper link failure in approximately 20 ms.Two DC inputs can be connected to live sources at the same time, so the unit keeps running if one supply fails. A relay alarm output signals power or network link failures, and Modbus/TCP, Modbus/RTU and OPC let a SCADA system read the status of the Ethernet and fiber ports.ApplicationsLong-distance industrial Ethernet links where fibre immunity to EMI/RFI and surges is requiredRedundant ring networks for plant and process communicationSCADA monitoring of network and power status via Modbus or OPC

MSM-508FCS-T is an 8-port industrial Ethernet Layer 2 managed switch with two single-mode 100Base-FX fibre ports using SC connectors. Because data travels over fibre optic links, transmission is immune to EMI and RFI. It suits installations where the network must be kept clear of electrical exposure, surges, lightning and chemical corrosion.The switch can be configured through its RS-232 console port or over Ethernet using Telnet or a web browser. Its management feature set includes 802.1Q tag-based VLAN, port-based VLAN, 802.1p QoS, port trunking, spanning tree, cable testing and port mirroring. The built-in Cyber-Ring technique allows several switches to be arranged in a redundant ring, typically recovering from a fibre or copper link failure in approximately 20 ms.Two DC power inputs can be connected at the same time, so a failed supply is covered by the second live source. A relay alarm output signals power or network link failures, and Modbus/TCP, Modbus/RTU and OPC support allow a SCADA system to monitor the status of the Ethernet and fibre ports. This ordering code includes a CA-090510 console cable and a 4SIX1K0000003 wall mount.ApplicationsIndustrial Ethernet backbones where transmission must be protected from electrical exposure, surges, lightning or chemical corrosionRedundant ring networks requiring fast link-failure recoverySCADA systems monitoring Ethernet and fibre port status over Modbus or OPC

The MSM-508FT-T is an 8-port Layer 2 managed switch that pairs six RJ-45 10/100Base-TX ports with two multi-mode 100Base-FX ST fibre ports. Fibre transmission is immune to EMI and RFI, which makes it a good choice where links must be kept clear of electrical exposure, surges, lightning or chemical corrosion.The switch can be configured through its RS-232 console or over Ethernet using Telnet or a web browser. Managed functions include 802.1Q tag-based VLAN, port-based VLAN, 802.1p QoS, port trunking, spanning tree, cable testing and port mirroring. Built-in ICP DAS Cyber-Ring technology lets several switches form a redundant ring that recovers from a fibre or copper link failure in approximately 20 ms.Two DC power inputs (+12 VDC to +48 VDC) can be connected to live sources at the same time, so one source takes over if the other fails. A relay output signals power or network link failures, and Modbus/TCP, Modbus/RTU and OPC let a SCADA system monitor the status of the Ethernet and fibre ports.ApplicationsEthernet links that must be electrically isolated from surges, lightning or ground differencesInstallations exposed to chemical corrosion or EMI/RFIRedundant ring networks with fast link-failure recoverySCADA monitoring of network and fibre port status via Modbus or OPC