X-boards

The X000 is a small-size prototype board, a perfboard designed for the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. It gives engineers a compact platform for prototyping their own interface circuitry alongside these controllers.At 38 mm x 64 mm, the X000 is the smallest board in the X-board range and suits projects where space on the controller side is limited. It is rated for an operating temperature of -25 ~ +75 °C and a storage temperature of -40 ~ +80 °C, with humidity handling of 5 ~ 90 %, non-condensing.Prototype board for the listed I-7188 and uPAC-7186EX seriesSmall form factor at 38 mm x 64 mmApplicationsPrototyping custom interface circuits for I-7188 and uPAC-7186EX series controllers

X001 is a small prototype perfboard designed for the I-7188XC. It gives engineers a compact area to build and test custom circuitry around the controller before committing to a final layout.At 60 mm x 70 mm, the board is suited to bench work and early-stage development where space is limited. It is rated for an operating temperature of -25 ~ +75 °C, with storage from -40 ~ +80 °C and a humidity range of 5 ~ 90 %, non-condensing.Compact 60 mm x 70 mm footprintDesigned for use with the I-7188XCApplicationsPrototyping custom circuits for the I-7188XC

X002 is a prototype board, supplied as a perfboard for building and testing custom circuitry alongside the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. It gives engineers a compact working area for trial wiring and hardware validation before committing to a final design.The board measures 114 mm x 170 mm and is rated for an operating temperature of -25 ~ +75 °C, with storage between -40 ~ +80 °C and humidity of 5 ~ 90 %, non-condensing. It carries FCC and WEEE certification.Suited to prototyping and testing with the listed I-7188 and uPAC-7186EX series unitsApplicationsPrototyping custom circuits for I-7188 and uPAC-7186EX series controllersHardware testing and validation during development

X003 is a compact testing board used to run a self-test on controllers from the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. It gives engineers a simple way to check a controller's basic operation without building a dedicated test setup.The board is small at 38 mm x 64 mm and draws only 0.2 W, so it adds little load or space requirement to a test bench. It is rated for an operating temperature of -25 ~ +75 °C, with storage between -40 ~ +80 °C and humidity of 5 ~ 90 %, non-condensing.The board is WEEE certified and is listed as part of the X-board range of PAC I/O modules, alongside the other X000 to X006 items in the series.ApplicationsSelf-testing of I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series controllersFunctional checks on PAC I/O systems during bench testing

X004 is a self-test board for checking the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. It gives engineers a dedicated way to run a self-test on these controllers without building a custom fixture.The board is compact at 38 mm x 64 mm and consumes 0.2 W. It is rated for an operating temperature of -25 ~ +75 °C and storage from -40 ~ +80 °C, with humidity tolerance of 5 ~ 90 %, non-condensing.Suited to test and commissioning work on the listed seriesLow power draw at 0.2 WWide operating range from -25 to +75 °CApplicationsSelf-testing of I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series units

The X005 is a small-format prototype perfboard for engineers who need to build and test their own circuitry alongside ICP DAS controllers. At 38 mm x 64 mm, it is compact enough for tight enclosures while still giving room for custom wiring and components.It is designed for the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. The board is rated for an operating temperature of -25 ~ +75 °C and a storage temperature of -40 ~ +80 °C, with humidity tolerance of 5 ~ 90 %, non-condensing.Small 38 mm x 64 mm perfboard formatMatches the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX seriesOperating temperature -25 ~ +75 °CApplicationsPrototyping custom circuits for I-7188 and uPAC-7186EX series projects

The X006 is a large-size prototype board for engineers who need to build and test custom circuitry alongside the I-7188XB, I-7188XC, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. Its 72 mm x 65 mm footprint gives more working area than the smaller boards in the X-board range.Use the X006 to prototype interface or support circuits during development before moving to a finished design. The board is rated for an operating temperature of -25 ~ +75 °C, a storage temperature of -40 ~ +80 °C and a humidity range of 5 ~ 90 %, non-condensing.The X006 is listed under the PAC I/O Modules accessories within the X-board family. Compare it with X000 to X005 if you need a different board size.ApplicationsPrototyping custom interface circuits for I-7188 and uPAC-7186EX series controllersDevelopment and testing of add-on circuitry before final board design

X100 adds eight non-isolated digital input channels to a compatible µPAC controller. It is designed for the I-7188XC, so engineers needing extra discrete inputs on that platform can fit it directly without a separate I/O unit.Each channel recognises an ON state from 3.5 to 30 VDC and an OFF state at 1 VDC maximum. The board draws 0.3 W and measures 38 mm x 64 mm. It operates from -25 to +75 °C and is rated for 5 to 90 % humidity, non-condensing.Only one X-board can be fitted to each µPAC, so plan slot allocation before ordering. Because the inputs are not isolated, check the wiring arrangement against your system design.ApplicationsDigital input expansion for the I-7188XC controller

The X101 adds eight TTL-level digital outputs to an I-7188XC controller through the X-board interface. Its outputs are non-isolated and rated at 64 mA load current, which suits direct switching of the signals an engineer needs to drive from the controller.Each µPAC accepts only one X-board, so the X101 is the way to add eight digital outputs to a single I-7188XC. The module draws 0.4 W and measures 38 mm x 64 mm.The X101 is rated for an operating range of -25 ~ +75 °C, with storage from -40 ~ +80 °C and 5 ~ 90 % humidity, non-condensing. It is listed with WEEE certification.ApplicationsAdding digital output channels to an I-7188XC controller

The X102 adds two relay outputs to an I-7188XC controller through its X-board interface. Each channel is a Form C contact, so engineers can switch external loads from the PAC without adding separate relay hardware.Contacts are rated at 220 VDC or 250 VAC at 2 A, with operate and release times of 6 ms each. The source data lists typical electrical endurance of 500,000 operations at 30 VDC/1 A and 100,000 operations at 125 VAC/0.5 A, which helps when estimating service life for switching duty.The board measures 38 mm x 64 mm and is rated for an operating temperature of -25 ~ +75 °C. Only one X-board can be fitted to each controller, so plan the I/O mix of the system before ordering.ApplicationsSwitching external loads from an I-7188XC controller

The X103 adds seven isolated digital input channels to the I-7188XC controller. It is intended for engineers who need to sense DC switching signals within a compact PAC system, with the input isolation helping to separate field wiring from the controller side.Inputs register as ON at levels from 3.5 to 30 VDC and as OFF at 1 VDC maximum. The board draws 0.3 W and measures 38 mm x 64 mm. It is rated for an operating temperature of -25 ~ +75 °C and storage from -40 ~ +80 °C, with humidity of 5 ~ 90 %, non-condensing.X103 is part of the X-board range for I-7188 and uPAC-7186 series controllers. Only one X-board can be fitted to each µPAC, so plan your I/O layout accordingly when specifying a system.ApplicationsDigital input expansion for I-7188XC controllers

The X104 is an X-board that adds eight non-isolated digital channels to an I-7188XC controller. Each channel can be set in software as a digital input or a digital output, so one board can match the mix of signals in your application.X-boards in this series fit the I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX series. Each µPAC accepts only one X-board, so plan the I/O count per controller accordingly. The X104 is listed for use with the I-7188XC.With a 0.3 W power consumption, a compact 38 mm x 64 mm footprint and an operating range of -25 ~ +75 °C, the X104 suits compact control cabinets. It carries WEEE certification.ApplicationsAdding digital inputs and outputs to an I-7188XC-based control system

The X105 adds eight programmable digital channels to the I-7188XC. Each channel can be set as a digital input or a digital output, so one board can serve either role depending on how the application needs it.On the input side, the channels accept an ON level of 3.5 ~ 30 VDC and read OFF at 1 VDC max. The outputs are TTL level. Channels are non-isolated, so the board suits designs where galvanic separation is not required at the I/O.Each µPAC accepts only one X-board, so the X105 is a straightforward way to add discrete I/O to an I-7188XC. It draws 0.3 W, measures 38 mm x 64 mm, and is rated for an operating range of -25 ~ +75 °C.ApplicationsAdding discrete digital inputs or outputs to an I-7188XC controller

X106 is an X-board that adds discrete I/O to the I-7188XC µPAC. It provides three non-isolated digital input channels and two non-isolated digital output channels, so a single board covers both sensing and switching duties on the controller.A jumper selects whether the channels operate as digital inputs or outputs, which lets you configure the board to suit the application. Digital inputs accept 3.5 ~ 30 VDC as ON and read OFF at 1 VDC max. Digital outputs drive loads up to +30 VDC at 250 mA.Each µPAC accepts only one X-board, so the X106 is best suited to projects where the I-7188XC needs a compact, low-power I/O expansion of this size (38 mm x 64 mm, 0.3 W) that operates from -25 ~ +75 °C.Three non-isolated digital inputs with a 3.5 ~ 30 VDC ON levelTwo non-isolated digital outputs, load up to +30 VDC and 250 mAJumper selects digital input or digital output functionDesigned for the I-7188XC µPAC; one X-board per µPACOperating temperature -25 ~ +75 °C, storage -40 ~ +80 °CApplicationsAdding digital input and output points to an I-7188XC µPAC

X107 CR adds six digital inputs and seven digital outputs to compatible I-7188 and uPAC-7186EX series controllers through a plug-in X-board. It suits projects where extra discrete signals are needed without changing the controller itself.The digital inputs accept an ON level of 3.5 ~ 30 VDC and an OFF level of 1 VDC max. The seven outputs are open collector, TTL type, with a load voltage of up to +30 VDC and a load current of 100 mA per channel. Both input and output sides are non-isolated.Each µPAC accepts only one X-board, so plan the slot allocation when specifying a system. The module draws 0.3 W and measures 38 mm x 64 mm, with an operating range of -25 ~ +75 °C.ApplicationsAdding discrete inputs and outputs to compatible I-7188 series controllersExtending digital I/O on uPAC-7186EX series controllers

The X109 adds seven PhotoMos relay outputs to supported I-7188 and uPAC-7186EX series controllers. Each channel is a Form A contact, so engineers can switch external circuits directly from the controller.PhotoMos switching gives fast, low-leakage operation. The source specifies an operate time of 0.23 ms, a release time of 0.04 ms and leakage current of 1 uA, with 1500 VAC isolation. The board is rated for 350 V at 100 mA and operates from -25 to +75 °C.Compatible hosts are the I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. Only one X-board can be fitted to each µPAC, so plan the slot allocation of the controller before specifying the X109.ApplicationsSwitching external loads from I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series controllersAdding isolated relay outputs to existing PAC-based control systems

The X110 CR is a 14-channel non-isolated digital input X-board that adds 14 digital input channels to compatible I-7188 and uPAC-7186EX series controllers. Each channel reads an ON level from 3.5 ~ 30 VDC and an OFF level of 1 VDC max.It is designed for the I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. Only one X-board can be fitted to each uPAC, so it suits designs that need a compact digital input expansion on a single controller.Covers the 3.5 ~ 30 VDC ON range and 1 VDC max. OFF level for direct signal readingOperating range of -25 ~ +75 °C, with storage from -40 ~ +80 °CCompact 38 mm x 64 mm footprintApplicationsDigital input expansion on compatible I-7188 and uPAC-7186EX series controllersReading ON/OFF status signals in the 3.5 ~ 30 VDC range

The X111 is a 13-channel non-isolated digital output X-board for expanding the discrete output capability of compatible I-7188 and uPAC controllers. Its open collector TTL outputs are suited to switching external loads within a rating of up to +30 VDC and 100 mA per channel.The X111 is designed for the I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. Each uPAC accepts only one X-board, so the X111 is a practical choice where a single 13-channel digital output block is required on a supported controller. The board measures 38 mm x 64 mm and is rated for an operating temperature of -25 ~ +75 °C.13 digital output channels with no isolationOpen collector, TTL type outputsLoad voltage up to +30 VDC and load current of 100 mACompatible with I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series controllersApplicationsDigital output expansion for supported I-7188 and uPAC controllersSwitching external loads at up to +30 VDC and 100 mA per channel

X119 adds seven digital inputs and seven digital outputs to supported PAC controllers through a plug-in X-board. Both channel groups are non-isolated, so the board suits engineers who want straightforward discrete I/O on the controller itself.The digital inputs accept an ON level from 3.5 to 30 VDC and read OFF below 1 VDC. Each digital output can switch loads up to +30 VDC at 100 mA. The board draws 0.5 W and is supplied without a case, measuring 38 mm x 64 mm.Only one X-board can be fitted to each µPAC unit. Check the controller model before ordering, as the X119 is listed for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series controllers.ApplicationsAdding discrete digital I/O to supported uPAC and I-7188 controllersSwitching and sensing signals in compact PAC-based automation nodes

The X200 is a single-channel analogue input X-board for the I-7188XC controller. It converts a 0 ~ 2.5 VDC voltage signal into a 12-bit reading, giving engineers a simple way to add one voltage measurement point to an existing I-7188XC-based system.Input channel is non-isolated, with a 100 kΩ input impedance and overvoltage protection rated at ±5 VDC. The sampling rate is up to 900 Hz, suited to monitoring slowly changing voltage signals on a single channel.The board measures 38 mm x 64 mm and operates from -25 ~ +75 °C, with storage down to -40 ~ +80 °C and humidity tolerance of 5 ~ 90 % non-condensing. Only one X-board can be fitted to each µPAC, so plan slot allocation accordingly.ApplicationsSingle-channel voltage measurement on I-7188XC-based controllers

The X202 is a 7-channel analog input X-board that adds current-signal acquisition to supported I-7188 and uPAC-7186EX series controllers. Each channel converts a 0 ~ 20 mA input at 12-bit resolution, with a maximum sampling rate of 1 KHz.Compatible hosts include the I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series. Only one X-board can be fitted to each µPAC, so the X202 suits projects that need seven extra current inputs on a single controller.Key points for selection:Non-isolated inputs, with the common voltage protection rated at ±15 VDCInput impedance of 125 Ohm per channelCompact 38 mm x 64 mm footprintApplicationsCurrent-loop analog signal acquisition on compatible I-7188 and uPAC-7186EX controllersAdding analog input channels to a supported µPAC

The X203 is an X-board that extends supported µPAC controllers with analogue, digital input and digital output channels on a single board. It combines two 12-bit differential current inputs (0 ~ 20 mA), two digital inputs and six digital outputs, all without isolation.The analogue inputs sample at up to 1 KHz Max. and have a 125 Ohm input impedance, making the board suitable for reading current-loop signals. The digital inputs are wet-contact, sink-type inputs, and the six digital outputs are NPN open-collector drivers rated for up to +30 VDC and 100 mA per channel.Each µPAC accepts only one X-board. The X203 is intended for the I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX series, and is supplied with CE, UKCA, FCC, RoHS and WEEE certifications. Operating temperature is -25 ~ +75 °C.ApplicationsReading 0 ~ 20 mA current-loop sensor signals on a µPAC controllerMonitoring switch and dry-contact status with wet-contact digital inputsSwitching NPN-type loads through open-collector digital outputs

The X300 adds two analogue voltage outputs to a compatible controller through a plug-in X-board. Each channel uses a 12-bit D/A stage with an output range of 0 ~ 4.095 VDC, which suits control signals that need a simple, known voltage span.The X300 is specifically listed for the I-7188XC. The wider X-board series covers the I-7188XA, I-7188XB, I-7188XG, I-7188EG, I-7188EX and several uPAC-7186EX variants, so check the host model before ordering. Only one X-board can be fitted to each µPAC.Non-isolated outputs with a 5 mA voltage output capability per the source dataCompact 38 mm x 64 mm board footprintOperating range -25 ~ +75 °C, storage -40 ~ +80 °CApplicationsProviding 0 ~ 4.095 V analogue control outputs on an I-7188XC controller

The X301 adds one voltage analog input and one voltage analog output to the I-7188XC. Both channels are 12-bit and non-isolated, so the X301 suits projects that need to read a low-voltage signal and drive a control voltage from the same controller board.The input accepts 0 ~ 2.5 VDC and samples at up to 200 KHz, with a 1 KOhm input impedance and +30 VDC overvoltage protection. The output spans 0 ~ 4.095 V and can source up to 20 mA.The X301 is designed for the I-7188XC. The wider X-board range also covers other I-7188 and uPAC-7186 controllers, but the X301 itself is specified for the I-7188XC. Check the ordering code and controller model before fitting.ApplicationsAnalog voltage acquisition on I-7188XC systemsAnalog voltage output for control on I-7188XC systems