tGW-715i-UL Modbus TCP to RTU/ASCII Gateway, PoE, Isolated RS-422/485
Compact DIN-rail Modbus TCP to RTU/ASCII gateway with PoE and one 3000 VDC isolated RS-422/485 port, for connecting serial Modbus devices to Ethernet networks at -25 ~ +70 °C.
- Modbus TCP/UDP master and slave, with Modbus RTU/ASCII master and slave on the serial side
- 1 x RS-422/485 port with 3000 VDC signal isolation
- Up to 32 TCP connections (masters) per serial port
- Read-cache for faster Modbus TCP/UDP responses and reduced RS-485 bus loading
- IEEE 802.3af Class 1 PoE or +12 ~ 48 VDC terminal block power
- Static IP or DHCP configuration, UDP Search device discovery and HTTP web configuration
1 506,33 kr per stk.
| 1–9 stk. | 1 506,33 kr | |
|---|---|---|
| 10–30 stk. | 1 454,39 kr | −3 % |
| 31+ stk. | 1 433,61 kr | −5 % |
Produktinformasjon "tGW-715i-UL Modbus TCP to RTU/ASCII Gateway, PoE, Isolated RS-422/485"
The tGW-715i-UL CR bridges Modbus TCP hosts and serial Modbus RTU or ASCII devices over Ethernet, removing the cable length limits of legacy RS-485 links. It suits engineers who need to bring existing serial instruments or controllers onto a TCP/IP network without changing the field devices.
The isolated variant adds 3000 VDC signal isolation on its single RS-422/485 port, which helps protect the serial bus from ground differences between sites. The gateway can also route data between two serial Modbus devices across TCP/IP, supporting pair-connection, serial-bridge and serial-tunnel arrangements. A read-cache stores previous requests and responses, so repeated queries from several masters to the same slave can be answered faster and with less load on the RS-485 bus.
Power can come from an IEEE 802.3af Class 1 PoE switch over standard Ethernet cable, or from a +12 ~ 48 VDC terminal block input. The standard operating temperature range is -25 ~ +70 °C. A DC-jack to 2-wire power cable, 0.3 M (CA-002-UL), is included.
Applications
- Factory automation
- Building and home automation
- Remote diagnosis and management
- Solar monitoring
| Product type: | Modbus TCP to RTU/ASCII gateway |
|---|---|
| Interface: | Ethernet, RS-422/485 |
| Protocol: | Modbus ASCII, Modbus RTU, Modbus TCP |
| Ports: | 2 |
| PoE: | Yes, IEEE 802.3af Class 1 |
| Isolation: | 3000 VDC (serial signal) |
| Power input: | PoE or +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Spesifikasjoner
| Ethernet | |
|---|---|
| Ports | 10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
| PoE | PoE (IEEE 802.3af, Class 1) |
| COM Ports | |
| Ports | tGW-715-UL & tGW-715-UL-UTA: 1 x RS-422/485 (non-isolation) tGW-715i-UL & tGW-715i-UL-UTA: 1 x RS-422/485 (3000VDC Signal Isolation) |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Odd, Even, Mark, Space |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 2 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 0.07 A @ 24 VDC |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 52 mm x 27 mm x 95 mm (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | tGW-715-UL & tGW-715i-UL: -25 ~ +70 °C tGW-715-UL-UTA & tGW-715i-UL-UTA: -40 ~ +70 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn