iP-8847 8-Slot ISaGRAF Ethernet PAC with 80186 CPU and MiniOS7
ISaGRAF PAC with an 80 MHz 80186 CPU, MiniOS7 and eight hot-swap slots for I-87K I/O modules, programmed to IEC 61131-3 with dual Ethernet ports.
- 80186 CPU at 80 MHz running MiniOS7
- Embedded ISaGRAF Ver.3 SoftLogic programmable to IEC 61131-3
- 8 hot-swap slots for high profile I-87K serial I/O modules
- Dual 10/100 Base-TX Ethernet ports (RJ-45)
- 4 serial ports: 2 x RS-232, 1 x RS-485 (3000 VDC isolated), 1 x RS-232/RS-485
- 512 KB battery-backed SRAM to retain data
6 846,02 kr per stk.
| 1–9 stk. | 6 846,02 kr | |
|---|---|---|
| 10–30 stk. | 6 648,64 kr | −3 % |
| 31+ stk. | 6 503,20 kr | −5 % |
Produktinformasjon "iP-8847 8-Slot ISaGRAF Ethernet PAC with 80186 CPU and MiniOS7"
The iP-8847 CR is an 8-slot ISaGRAF-based Ethernet PAC for engineers who need IEC 61131-3 control logic running on an 80186 CPU at 80 MHz under MiniOS7. Embedded ISaGRAF Ver.3 SoftLogic handles the programming, while the eight hot-swap slots accept high profile I-87K serial I/O modules for expanding the system.
Communications are covered by dual 10/100 Base-TX Ethernet ports, four serial ports (RS-232/RS-485) and a wide protocol set including Modbus TCP/IP, Modbus RTU, DCON, CAN/CANopen and UDP/TCP client and server functions. Battery-backed SRAM retains data through power loss, and redundant power inputs support higher availability designs.
The ordering code carries the RoHS designation given in the source product description. Mechanical installation options are DIN-rail or wall mounting, with an operating temperature range of -25 ~ +75°C.
Applications
- Machine and process control using IEC 61131-3 logic
- Distributed I/O with I-87K serial modules and RS-485 remote I/O
- Serial device integration over RS-232/RS-485 and Modbus networks
| Product type: | PAC |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | Modbus TCP |
| Ports: | 2 x Ethernet, 4 x serial |
| Isolation: | 1 kV (power), 3000 VDC (RS-485) |
| Power input: | +10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Spesifikasjoner
| Software | |
|---|---|
| OS | MiniOS7 |
| Protocol | • NET ID • Modbus TCP/IP Slave • Modbus RTU/ASCII Master • Modbus RTU Slave • DCON Protocol • User-defined Protocol • I/O Type: DCON, Modbus RTU remote I/O • FRnet I/O • Send Email • Fbus • Ebus • SMS • UDP Server & UDP Client • TCP Client • CAN/CANopen • FTP Client |
| Development | Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
| CPU Module | |
| CPU | 80186 or compatible, 16-bit and 80 MHz |
| 64-bit Hardware Serial Number | Yes |
| EEPROM | 16 KB |
| Flash | 512 KB |
| NVRAM | 31 Bytes |
| SRAM | 768 KB SRAM, 512 KB Dual battery backup SRAM |
| Storage Expansion | Yes, but ISaGRAF does not support |
| Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer | Yes |
| Display | |
| Type | 5 x Digit 7 Segment LED Display |
| LED Indicators | |
| Status | 3 x Programmable |
| I/O Expansion | |
| I/O Type | I-8K, I-87K series |
| Slots | 8 |
| HMI | |
| Buzzer | Yes |
| DIP Switch | 8-bit for address |
| Push Button | 4 |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-TX |
| COM Ports | |
| Ports | 2 x RS-232, 1 x RS-485 (3000 VDC Isolated), 1 x RS-232/RS-485 |
| Power | |
| Input Range | +10 ~ 30 VDC (1 kV Isolated ) |
| Consumption | 7.2 W |
| Mechanical | |
| Dimensions (mm) | 355 x 132 x 111 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90 % RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn