ZT-2015 ZigBee Wireless 6-ch RTD Input Module, Router
ZigBee router-type wireless RTD input module with six channels for Pt100, Pt1000, Ni120, Cu100 and Cu1000 sensors, with 3-wire lead resistance elimination.
- Six wireless RTD input channels supporting 2/3-wire RTD sensors
- 3-wire lead resistance elimination for accurate readings over long cable runs
- ZigBee PRO 2007 router with DCON and Modbus RTU protocol support
- Line-of-sight range of 300 m to 700 m, depending on RF power setting
- Individual channel configuration, open wire detection and 120 VDC/110 VAC overvoltage protection
- 3000 VDC intra-module isolation and ±4 kV ESD contact rating
3 719,08 kr per stk.
| 1–9 stk. | 3 719,08 kr | |
|---|---|---|
| 10–30 stk. | 3 604,81 kr | −3 % |
| 31+ stk. | 3 532,09 kr | −5 % |
Produktinformasjon "ZT-2015 ZigBee Wireless 6-ch RTD Input Module, Router"
The ZT-2015 CR is a wireless RTD acquisition node that lets engineers collect temperature readings from six channels without running signal cabling back to a controller. It operates in the ISM 2.4 GHz band and acts as a ZigBee router, so it can extend a wireless network while it reports its own measurements.
Each channel accepts 2-wire or 3-wire RTD sensors and can be configured individually. The 3-wire lead resistance elimination keeps readings accurate over long cable runs, and open wire detection and overvoltage protection (120 VDC/110 VAC) help protect the module and flag faulty connections. Address, protocol, checksum, ZB-PID, ZB-channel and type code are set with rotary and DIP switches, and a Windows GUI configuration utility is available.
With a stated line-of-sight range of 300 m to 700 m, depending on the RF power setting, and 3000 VDC intra-module isolation, the ZT-2015 CR suits distributed temperature monitoring in building, factory and machine automation, as well as remote maintenance and diagnosis tasks.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Wireless I/O Module |
|---|---|
| Interface: | ZigBee |
| Protocol: | DCON, Modbus RTU |
| Analog inputs: | 6 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Isolation | |
| Intra-module Isolation | 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Power Line, Communication Line and each Channel, ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±3 kV for Power Line |
| LED Indicators | |
| Status | 1 x Power and Communication |
| ZigBee | |
| Antenna | 2.4 GHz - 5 dBi Omni directional |
| Max. Slaves | 255 |
| Protocol | Supports DCON and Modbus RTU Protocols |
| Standard | ZigBee PRO 2007 |
| Transmission Power | 10 dBm to 19 dBm (EIRP) (Adjustable via Utility) |
| Transmission Distance (LoS) | 300 m to 700 m (Depending on the RF power setting) |
| Analog Input | |
| Channels | 6 |
| Type | 2/3-wire RTD |
| Sensor Type | Pt100, Pt1000, Ni120, Cu100, Cu1000 |
| Sampling Rate | 12 Samples/Sec. (Total) |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 120 VDC/110 VAC |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes |
| 3-wire RTD Lead Resistance Elimination | Yes |
| Analog Output | |
| Accuracy | ±0.05% |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 1.5 W Max. |
| Mechanical | |
| Dimensions (mm) | 33 x 87 x 110 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn