SL-PA6R1-WF Stack Light Monitoring Module, 6x AC DI + 1x Relay
Monitors AC stack light signals on six digital inputs and drives an alarm relay, reporting colour segment status over Modbus RTU, Modbus TCP or MQTT via RS-485, Ethernet or Wi-Fi.
- Detects ON, OFF and flashing status of each stack light colour segment on six AC digital inputs
- Up to 81 user-defined combinations of colour segments, with reporting of the previous status duration
- One Form A relay output for alarm devices
- Modbus RTU over RS-485, Modbus TCP over Ethernet and Wi-Fi, and MQTT over Ethernet
- Wi-Fi compliant with IEEE 802.11 b/g/n, supporting infrastructure and limit-AP modes
- Redundant power inputs: PoE (IEEE 802.3af, Class 1) and +10 ~ +48 VDC terminal block
2 056,92 kr per stk.
| 1–9 stk. | 2 056,92 kr | |
|---|---|---|
| 10–30 stk. | 1 994,59 kr | −3 % |
| 31+ stk. | 1 953,04 kr | −5 % |
Produktinformasjon "SL-PA6R1-WF Stack Light Monitoring Module, 6x AC DI + 1x Relay"
The SL-PA6R1-WF CR is a DIN-rail stack light monitoring module that watches the indicator outputs of a machine without interfering with its operation. Each of its six AC digital inputs can read a colour segment as ON, OFF or flashing, so the current operating state of a machine can be tracked remotely and acted on quickly.
Beyond single segments, the module can evaluate user-defined combinations of colour segments, with up to 81 combinations, and report how long the previous status lasted. Status data is available over Modbus RTU on RS-485, or over Modbus TCP and MQTT on Ethernet, with Modbus TCP also available over Wi-Fi. A single relay output can be used to trigger an alarm device.
Wireless connectivity follows IEEE 802.11 b/g/n and supports infrastructure and limit-AP modes. Power can be supplied through PoE (IEEE 802.3af, Class 1) or a DC terminal block, and the module is configured through its built-in web interface. This ordering code is listed by the manufacturer as Asia Only.
Applications
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Stack light monitoring module |
|---|---|
| Interface: | Ethernet, RS-485, Wi-Fi |
| Protocol: | Modbus RTU, Modbus TCP, MQTT |
| Digital inputs: | 6 |
| Relay outputs: | 1 |
| Ports: | 1 |
| PoE: | IEEE 802.3af, Class 1 |
| Isolation: | 3750 VDC |
| Power input: | +10 ~ +48 VDC, PoE |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Yes, Module (2.3 seconds), Communication (Programmable) |
| System | |
| Security | IP filter (whitelist) and Password (web) |
| Isolation | |
| Intra-module Isolation | 3750 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | S1: System indicator E1: PoE indicator (Green) Link/Act (Yellow) Antenna: Signal Strength |
| Digital Input | |
| Able to detect the status of each color segment: ON, OFF, or Flashing | Yes |
| Wi-Fi | |
| Transmission Distance (LoS) | 50 meters (LOS) |
| Standard Supported | IEEE 802.11 b/g/n |
| RX Sensitivity | -83 dBm @ 11 Mbps |
| Output Power | 8 dBm @ 11 Mbps |
| Mode | Infrastructure & Limit-AP |
| Encryption | WEP, WPA and WPA2 |
| Antenna | 5 dBi (Omni-Directional) |
| Digital Input | |
| Channels | 6 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | 80 VAC ~240 VAC |
| OFF Voltage Level | 30 VAC Max. |
| Isolation | 3750 VDC |
| Input Impedance | 150 KΩ, 2 W |
| Overvoltage Protection | 300 VAC |
| Max. Stack Light Flashing Speed | 60 Hz |
| Report Duration of Previous Status | Yes, 10 ~ 65500 ms |
| Status monitoring for user-defined combinations of multiple color segments | Max. 81 combinations |
| Relay Output | |
| Channels | 1 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 5 A @ 250 VAC or 5 A @ 30 VDC |
| Operate Time | 6 ms |
| Release Time | 3 ms |
| Electrical Endurance | VDE: 5 A @ 250 VAC 30,000 ops (10 ops/minute) at 75°C 5 A @ 30 VDC 70,000 ops (10 ops/minute) at 75°C UL: 5 A @ 250 VAC/30 VDC 6,000 ops 3 A @ 250 VAC/30 VDC 100,000 ops |
| Mechanical Endurance | 20,000,000 ops at no load (300 ops/minute) |
| Power on Value | Yes, Programmable |
| Safe Value | Yes, Programmable |
| Ethernet | |
| Ports | 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators) |
| COM Ports | |
| Baud Rate | 1200 ~ 115200 bps |
| Protocol | Modbus/RTU(RS-485), Modbus TCP(Ethernet, Wi-Fi) and MQTT(Ethernet) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | Terminal Block: +10 ~ +48 VDC PoE: IEEE 802.3af, Class 1 |
| Consumption | PoE: 1.2 W Max. Non-PoE: 1 W Max. |
| Mechanical | |
| Dimensions (mm) | 33 x 108 x 127 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn