SG-3016-G Strain Gauge Input Signal Conditioner, mV to V/mA Output
Single-channel strain gauge signal conditioner that converts ±10 to ±100 mV inputs to ±5/±10 V, 0~5/0~10 V or 0~20 mA outputs, with 1000 VDC three-way isolation.
- Single-channel strain gauge input conditioner with ±10 to ±100 mV input ranges
- Voltage outputs of ±5 V, ±10 V, 0~5 V and 0~10 V, plus 0~20 mA current output, selectable via switches
- 1000 VDC three-way isolation between input, output and power
- Integrated excitation voltage output of 1 to +10 VDC, up to 20 mA
- Accuracy of ±0.1% of full range with three VRs for Zero, Span and Exci calibration
- Bandwidth typically below 600 Hz
1 932,26 kr per stk.
| 1–9 stk. | 1 932,26 kr | |
|---|---|---|
| 10–30 stk. | 1 869,93 kr | −3 % |
| 31+ stk. | 1 828,38 kr | −5 % |
Produktinformasjon "SG-3016-G Strain Gauge Input Signal Conditioner, mV to V/mA Output"
SG-3016-G CR is a DIN-rail signal conditioning module that takes a millivolt-level voltage input and delivers a standard voltage or current output for PLCs, data acquisition systems and other control equipment. Input ranges from ±10 mV to ±100 mV can be matched to outputs of ±5 V, ±10 V, 0~5 V, 0~10 V or 0~20 mA through internal configuration switches.
Input, output and power circuits are separated by 1000 VDC three-way isolation, which helps prevent ground loops and protects downstream equipment from interference. An integrated excitation voltage output of 1 to +10 VDC, rated for up to 20 mA, supports bridge-type sensors. Three potentiometers (Zero, Span and Exci) allow the input and output range to be calibrated for accuracy of ±0.1% of full range.
- Accuracy of ±0.1% of full range, typically 600 Hz bandwidth
- LED indicator for power and communication status
- Reverse polarity protection on the +10 to +30 VDC supply
- Operating temperature -25 °C to 75 °C, humidity 5 to 95% non-condensing
Applications
- Strain gauge signal conditioning
- Converting low-level millivolt sensor signals to standard voltage or current signals for control and monitoring systems
- Isolated signal transmission between sensors and industrial controllers
| Product type: | Signal conditioner |
|---|---|
| Analog inputs: | 1 |
| Analog outputs: | 1 |
| Isolation: | 1000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| Isolation | |
|---|---|
| Three-way Isolation | 1000 VDC |
| LED Indicators | |
| Status | Yes, 1 as Power/Communication Indicator |
| Analog Input | |
| Channels | 1 |
| Type | ±10 mV, ±20 mV, ±30 mV, ±50 mV, ±100 mV |
| Accuracy | ±0.1% of full range |
| Bandwidth | <600 Hz |
| Analog Output | |
| Channels | 1 |
| Range | Voltage: ±5 VDC, ±10 VDC, (Note 1: Only supports Bipolar-type input) 0 ~ 5 VDC, 0 ~ 10 VDC (Note 2: Only supports Unipolar-type input) Current: 0 ~ 20 mA (Note 2: Only supports Unipolar-type input) |
| Current Load Resistance | 0 ~ 500 Ω (Source) |
| Excitation Voltage Output | |
| Channels | 1 |
| Range | 1 ~ +10 VDC |
| Max. Load Current | +20 mA |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 1.44 W (Voltage Output), 1.74 W (Current Output) |
| Mechanical | |
| Dimensions (mm) | 25 mm x 114 mm x 70 mm (W x L x H) |
| Environment | |
| Operating Temperature | -25 °C ~ 75 °C |
| Storage Temperature | -30 °C ~ 75 °C |
| Humidity | 5 ~ 95%, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn