A-821PGH ISA DAQ Board, 16-ch 12-bit Analog Input, 45 kS/s
ISA bus multifunction DAQ board with 16 single-ended or 8 differential 12-bit analogue inputs at up to 45 kS/s, plus one 12-bit analogue output, 16 digital inputs and 16 digital outputs.
- 12-bit A/D converter with 16 single-ended or 8 differential input channels
- Sampling rate up to 45 kS/s
- Software-programmable gain of 1, 10, 100 and 1000 (PGH version)
- One 12-bit analogue output channel with 0 ~ 5 V and 0 ~ 10 V ranges
- 16 DI and 16 DO at 5 V/TTL levels
- Software and pacer triggering with polling or interrupt data transfer
2 233,53 kr per stk.
| 1–9 stk. | 2 233,53 kr | |
|---|---|---|
| 10–30 stk. | 2 160,81 kr | −3 % |
| 31+ stk. | 2 119,25 kr | −5 % |
Produktinformasjon "A-821PGH ISA DAQ Board, 16-ch 12-bit Analog Input, 45 kS/s"
The A-821PGH CR is a 12-bit multifunction data acquisition board for PC/AT compatible computers with an ISA bus. It combines a fast analogue input stage, a single analogue output channel and TTL-level digital I/O on one card, which suits engineers who need signal capture and simple control from a single slot.
The analogue inputs can be configured as 16 single-ended or 8 differential channels, sampling at up to 45 kS/s. The PGH version offers software-programmable gains of 1, 10, 100 and 1000, with input ranges of ±5 V, ±0.5 V, ±0.05 V and ±0.005 V. Triggering is available by software or pacer, with data transfer by polling or interrupt. A 16-bit timer/counter channel is also provided.
Connection is through a 37-pin D-Sub connector, and the CA-4002 D-Sub connector is included with this ordering code. The board is rated for an operating temperature of 0 ~ +60°C and carries CE, UKCA, FCC and WEEE marks.
Applications
- Signal analysis
- Industrial automation
- Laboratory automation
- Sensor interface
- FFT & frequency analysis
- Transient analysis
- Production test
- Process control
| Product type: | DAQ board |
|---|---|
| Interface: | ISA |
| Ports: | 37-pin D-Sub |
| Operating temperature: | 0 ~ +60 °C |
Spesifikasjoner
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Analog Input | |
| Channels | 16 single-ended/8 differential |
| Range | ± 5V, ± 0.5V, ± 0.05V, ± 0.005V |
| Resolution | 12-bit |
| Accuracy | 0.1% of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | 45 kS/s. Max. |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | 15 ppm/°C of FSR |
| Trigger Mode | Software, Pacer |
| Data Transfer | Polling, Interrupt |
| Analog Output | |
| Channels | 1 |
| Range | 0 ~ 10 V, 0 ~ 5 V |
| Resolution | 12-bit |
| Accuracy | ±10 LSB |
| Response Time | 500 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.6 μs to 0.01% for full scale step |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 40 mA Source: 20 mA |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 1 |
| Type | 5V /TTL |
| Resolution | 16-bit |
| PC Bus | |
| Type | ISA |
| Data Bus | 16-bit |
| Power | |
| Consumption | 300 mA @ +5 V 60 mA @ +12 V 30 mA @ -12 V |
| Mechanical | |
| Dimensions (mm) | 106 X 160 X 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn