SG-3071-G DC Voltage Input Signal Conditioner, V/mA Output
Single-channel voltage input to voltage or current output signal conditioner with 1000 VDC three-way isolation, ±0.1% of full range accuracy and DIN-rail mounting.
- 1000 VDC three-way isolation between input, output and power
- Accuracy of ±0.1% of full range
- Input and output ranges set by internal configuration switches
- Two VRs (Zero, Span) for calibrating input/output range accuracy
- Bipolar or unipolar voltage input with voltage (±5 V, ±10 V) or current (0 ~ 20 mA, 4 ~ 20 mA) output
- Reverse polarity protection on a +10 ~ +30 VDC supply
1 506,33 kr per stk.
| 1–9 stk. | 1 506,33 kr | |
|---|---|---|
| 10–30 stk. | 1 454,39 kr | −3 % |
| 31+ stk. | 1 433,61 kr | −5 % |
Produktinformasjon "SG-3071-G DC Voltage Input Signal Conditioner, V/mA Output"
The SG-3071-G CR converts a DC voltage input into either a voltage or a current output. It accepts bipolar (±5 V, ±10 V) or unipolar (0 ~ 5 V, 0 ~ 10 V) input ranges, and the input and output ranges are selected through internal configuration switches, so no reprogramming is needed.
Input, output and power circuits are separated by 1000 VDC three-way isolation. Two VRs (Zero and Span) allow the accuracy of the input and output range to be calibrated, and an LED shows whether the module is operating correctly. The module mounts on a standard DIN rail and is rated for an operating range of -25 °C ~ 75 °C.
- Voltage output pairs with bipolar input; current output pairs with unipolar input.
- Typical bandwidth is 1 KHz.
Applications
- Converting DC voltage signals to standard voltage or current signals
- Signal isolation between input, output and power circuits
- Interfacing voltage sources with current-loop inputs in wide-temperature industrial environments
| Product type: | Signal conditioner |
|---|---|
| Analog inputs: | 1 |
| Analog outputs: | 1 |
| Isolation: | 1000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| Isolation | |
|---|---|
| Three-way Isolation | 1000 VDC |
| Analog Input | |
| Channels | 1 |
| Type | ±5 VDC, ±10 VDC (Bipolar) 0 ~ 5 VDC, 0 ~ 10 VDC (Unipolar) |
| Accuracy | ±0.1% of full range |
| Bandwidth | 1 KHz |
| Input Impedance | 1.6 MΩ |
| Analog Output | |
| Channels | 1 |
| Range | Voltage: ±5 VDC, ±10 VDC (Note 1: Only supports Bipolar-type input) Current: 0 ~ 20 mA, 4 ~ 20 mA (Note 2: Only supports Unipolar-type input) |
| Current Load Resistance | 0 ~ 500 Ω (Source) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 1.80 W (Voltage Output), 2.30 W (Current Output) |
| Mechanical | |
| Dimensions (mm) | 25 mm x 114 mm x 70 mm (W x L x H) |
| Environment | |
| Operating Temperature | -25 °C ~ 75 °C |
| Storage Temperature | -30 °C ~ 75 °C |
| Humidity | 5 ~ 95%, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn