ET-2224CI Ethernet I/O Module, 4-ch Analog Output with 2-port Switch
Four-channel analog output Ethernet I/O module with a 2-port switch for daisy-chain wiring, supporting Modbus TCP and MQTT. Ordering code ET-2224CI CR.
- Four analog output channels, each individually configurable for 0 ~ 5 V, 0 ~ 10 V, 0 ~ 20 mA or 4 ~ 20 mA
- 12-bit resolution with accuracy of ±0.1% of FSR
- 2-port 10/100 Base-Tx Ethernet switch with LAN bypass for daisy-chain wiring
- Modbus TCP/UDP, MQTT and SNMP V2c protocol support
- Open wire detection on 4 ~ 20 mA outputs, with programmable power-on and safe values
- Dual-watchdog support and I/O Pair Connection (Push and Pull)
4 300,84 kr per stk.
| 1–9 stk. | 4 300,84 kr | |
|---|---|---|
| 10–30 stk. | 4 176,18 kr | −3 % |
| 31+ stk. | 4 082,68 kr | −5 % |
Produktinformasjon "ET-2224CI Ethernet I/O Module, 4-ch Analog Output with 2-port Switch"
ET-2224CI is a 4-channel analog output module for Ethernet-based control networks. Each channel can be set individually to 0 ~ 5 V, 0 ~ 10 V, 0 ~ 20 mA or 4 ~ 20 mA, so one module can serve a mix of voltage and current actuators. Configuration is carried out through the built-in web server, and the power-on and safe output values are programmable for each channel.
The built-in 2-port 10/100 Base-Tx switch with LAN bypass allows devices to be daisy-chained along a line, reducing the cabling needed back to the switch. Open wire detection is provided for each 4 ~ 20 mA channel, and dual-watchdog support helps the module return to a defined state if communication is lost. I/O Pair Connection lets remote analog input data be written to local outputs via Modbus TCP.
For connectivity, the module supports Modbus TCP and Modbus UDP, and it can act as an MQTT publisher and subscriber, with automatic reconnection and Keep-Alive handling. SNMP V2c is also supported. The metal casing and DIN-rail mounting suit control cabinet installations, with 3000 VDC I/O and channel-to-channel isolation for noisy industrial environments.
Applications
- Factory Automation
- Machine Automation
- Building Automation
- Remote Diagnosis & Maintenance
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Ports: | 2 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Metal |
Spesifikasjoner
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit ARM |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet, AO, O/C (Note) |
| Analog Output | |
| Channels | 4 Differential |
| Type | Voltage, Current |
| Range | Voltage: 0 ~ +5 VDC, 0 ~ +10 VDC Current: 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Short Circuit Protection | Yes |
| DA Output Response Time | 10 ms per channel |
| Programmable Output Slope | Voltage: 0.0625 ~ 512 V/Second Current: 0.125 ~ 1024 mA/Second |
| Open Wire Detection | For 4 ~ 20 mA only |
| Voltage Output Capability | 10 V @ 10 mA |
| Current Load Resistance | 500 Ω |
| Individual Channel Configuration | Yes |
| Channel-to-Channel Isolation | 3000 VDC |
| Power-on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-Tx, Switch Ports |
| LAN bypass | Yes |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 5.4 W (max.) |
| Powered from Terminal Block | +10 ~ +48 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 33 x 184 x 129 (W x L x H) |
| Installation | DIN-Rail mounting / Wall mounting (Optional ASO-0015) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn