ADP-37/PCI 50-pin Opto-22 to DB-37 Adapter for PCI DAQ Card
Adapter that converts a 50-pin Opto-22 interface to a female DB-37 connector for PCI data acquisition cards. Supplied with a 50-pin, 20 cm flat cable (CA-5002).
- Converts 50-pin Opto-22 interface to female DB-37 connector
- Supplied with CA-5002 flat cable, 50-pin, 20 cm
- Board dimensions 114 mm x 102 mm
- Operating temperature 0 ~ +60 °C, storage -30 ~ +80 °C
- Humidity 10% ~ 90%, no condensing
- RoHS and WEEE listed
280,49 kr per stk.
| 1–9 stk. | 280,49 kr | |
|---|---|---|
| 10–30 stk. | 270,10 kr | −4 % |
| 31+ stk. | 270,10 kr | −4 % |
Produktinformasjon "ADP-37/PCI 50-pin Opto-22 to DB-37 Adapter for PCI DAQ Card"
The ADP-37/PCI CR is a connector adapter that brings a 50-pin Opto-22 interface out to a female DB-37 connector, making it easier to wire field signals to a PCI data acquisition card. It is supplied with a CA-5002 flat cable, 50-pin, 20 cm long, so it can be connected straight away.
The board measures 114 mm x 102 mm and is rated for an operating temperature of 0 ~ +60 °C, with a storage range of -30 ~ +80 °C. Relative humidity of 10% ~ 90% is permitted, non-condensing. The product is RoHS and WEEE listed.
Choose this variant when your system uses a PCI card and you need a 50-pin Opto-22 to DB-37 breakout. For the ISA card version, check the separate ADP-37 CR listing.
Applications
- Wiring 50-pin Opto-22 signals to DB-37 connectors on PCI data acquisition systems
| Product type: | Daughter board |
|---|---|
| Interface: | 50-pin Opto-22 to DB-37 |
| Operating temperature: | 0 ~ +60 °C |
Spesifikasjoner
| Mechanical | |
|---|---|
| Dimensions (mm) | 114 mm x 102 mm |
| Environment | |
| Operating Temperature | 0~ +60 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10% ~ 90%, no condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Logg inn