ET-7016 Ethernet I/O Module, 2-ch Strain Gauge Input, 2-ch DI, 2-ch DO
Ethernet I/O module with two strain gauge inputs, two DI/counter channels and two digital outputs, supporting Modbus TCP and Modbus UDP for remote measurement and control.
- Two differential strain gauge inputs supporting full-bridge, half-bridge and quarter-bridge wiring
- Individually configurable input ranges from ±15 mV to ±2.5 V, plus ±20 mA, 10 ~ 20 mA and 4 ~ 20 mA
- Compensation for voltage loss on long-distance strain gauge measurements
- Two DI/counter channels (wet contact, sink/source) and two isolated open-collector DO at 700 mA per channel
- Modbus TCP and Modbus UDP over one 10/100 Base-TX RJ-45 port
- Built-in web server and web HMI with ID, password and IP filter access control
3 199,66 kr per stk.
| 1–9 stk. | 3 199,66 kr | |
|---|---|---|
| 10–30 stk. | 3 106,16 kr | −3 % |
| 31+ stk. | 3 043,83 kr | −5 % |
Produktinformasjon "ET-7016 Ethernet I/O Module, 2-ch Strain Gauge Input, 2-ch DI, 2-ch DO"
The ET-7016 is an Ethernet I/O module for remote strain gauge measurement. It provides two differential analogue input channels that accept full-bridge, half-bridge and quarter-bridge wiring, along with a 0 ~ 10 V excitation output to power the bridge. Each analogue input can be configured with its own range, covering millivolt, voltage and current spans, so a single module can handle mixed sensor types.
On the digital side, the module offers two wet-contact inputs that can also count pulses, and two isolated open-collector outputs rated at 700 mA per channel. The digital outputs can be set as alarm outputs. Long-distance measurements are supported with compensation for the voltage loss along the cable run.
Communication is handled through a single 10/100 Base-TX RJ-45 port using Modbus TCP or Modbus UDP. A built-in web server and web HMI allow configuration and monitoring, and access can be restricted by ID, password and IP filter. Dual watchdogs and I/O pair connection add to the module's operational reliability, and it mounts on a DIN rail.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP |
| Digital inputs: | 2 |
| Digital outputs: | 2 |
| Analog inputs: | 2 |
| Ports: | 1 |
| Isolation: | Ethernet 1500 VDC, I/O 2500 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet |
| Digital Input/Counter | |
| Channels | 2 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +3.5 ~ +50 VDC |
| OFF Voltage Level | +1 VDC (max.) |
| Max. Counts | 4,294,967,295 (32-bit) |
| Frequency | 100 Hz |
| Min. Pulse Width | 5 ms |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
| Channels | 2 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 ~ +50 VDC |
| Load Current | 700 mA/channel |
| Overvoltage Protection | +60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Strain Gauge, Load Cell Input | |
| Channels | 2 (Differential) |
| Type | Strain Gauge, Voltage, Current |
| Range | ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20mA, 10 ~ 20 mA, 4 ~ 20 mA |
| Wiring | Full-Bridge, Half-Bridge, Quarter-Bridge |
| Accuracy | ±0.05% |
| Resolution | 16-bit |
| Sampling Rate | 10 Hz (total channels) |
| Impedance | Voltage Input: >400 kΩ, Current Input: 125 Ω |
| Individual Channel Configuration | Yes |
| Overvoltage Protection | +30 VDC |
| Excitation Voltage Output | |
| Channels | 1 |
| Range | 0 ~ 10 V |
| Accuracy | ±0.05% of FSR |
| Max. Load Current | 60 mA |
| Drift | ±50 ppm/°C |
| Power on Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.9 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn