iSN-101/S3 Liquid Leak Detection Module, 1-ch with Modbus RTU and DCON
1-channel wall-mount liquid leak detection module with relay output and RS-485 interface, supporting Modbus RTU and DCON. Includes a detection probe.
- Single-channel liquid leak detection with relay output (Form A x1, SPST)
- Sense cable and leader cable up to 500 meters, including extended cables
- Adjustable sensitivity by rotary switch, 26 KΩ ~ 580 KΩ
- Buzzer alarm with push-button mute and power/alarm LED indicators
- 1 x RS-485 port supporting Modbus RTU or DCON
- Software-configured baud rate 1200 ~ 115200 bps
685,64 kr per stk.
| 1–9 stk. | 685,64 kr | |
|---|---|---|
| 10–30 stk. | 664,86 kr | −3 % |
| 31+ stk. | 654,48 kr | −5 % |
Produktinformasjon "iSN-101/S3 Liquid Leak Detection Module, 1-ch with Modbus RTU and DCON"
The iSN-101/S3 CR is a compact liquid leak detection module that switches its own relay output when water is detected, so it can drive alarms or control equipment without an additional conversion module. Its single channel suits point detection with a probe or line detection with a sense cable.
The module can monitor sense cables of up to 500 meters, including the liquid leak detection cable and extended cables. Sensitivity is adjustable by rotary switch across a range of 26 KΩ ~ 580 KΩ. A buzzer sounds on detection and can be silenced with the push button, while two LEDs show power and alarm status.
Communication is over one RS-485 port using Modbus RTU or DCON, with software-configured baud rates from 1200 to 115200 bps. This allows the module to be integrated with networked collection hosts and monitoring systems for remote alarm and device control.
Applications
- Water pipe leak monitoring in buildings, including water, fire and sewage pipes
- Real-time leak detection in computer room base stations, warehouses, libraries, museums and industrial sites
- Monitoring air handling equipment, refrigeration units, liquid containers and pump tanks
- Detection in domestic water, drainage and electrical equipment areas
| Product type: | Liquid leak detection module |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON, Modbus RTU |
| Relay outputs: | 1 |
| Ports: | 1 |
| Power input: | 10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | Wall mount |
Spesifikasjoner
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±4 kV for Power |
| ESD (IEC 61000-4-2) | ±8 kV Air for Random Point |
| LED Indicators | |
| Status | 1 as Power Indicator 1 as Alarm Indicator |
| System | |
| Alarm | For both liquid leak detection and cable-break detection. |
| Buzzer | Yes. Can be muted by a push button. |
| Relay Output | Signal Relay, Form A x1, SPST 0.25 A @ 250 VAC 0.5 A @ 125 VAC 2 A @ 30 VDC |
| Liquid Leak Detection | |
| Channels | 1 |
| Liquid Type | Water, 2uS/cm |
| Sensor Type | Probe for point detection or Cable for line detection |
| Max. Cable Length | 500 meters Include Liquid Leak Detection Cable and Extended Cables. |
| Sensitivity Range | 26 KΩ ~ 580 KΩ (adjustable by rotary switch) |
| Cable-break Detection | Yes. For sense cable CA-LLD-DC100X-Lxxx only. |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | Software Configuration: 1200 ~ 115200 bps |
| Data Format | (N,8,1), (O,8,1), (E,8,1), (N,8,2) |
| Protocol | Modbus RTU or DCON |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 10 ~ 30 VDC |
| Consumption | 1.5 W Max. |
| Mechanical | |
| Dimensions (mm) | 80 x 70 x 28 (W x L x H) |
| Installation | Wall mount |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn