SG-3081-G DC Current Input Signal Conditioner, 1000 VDC Isolated
Signal conditioner that converts a 0/4 to 20 mA DC current input into a voltage or current output, with 1000 VDC three-way isolation and DIN-rail mounting.
- Three-way isolation of 1000 VDC between input, output and power
- Accuracy of ±0.1% of full range
- Input and output ranges selected by internal configuration switches
- Zero and Span VRs for calibrating the input/output range
- LED status indicator for quick functional check
- Typical bandwidth of 1 kHz
1 506,33 kr per stk.
| 1–9 stk. | 1 506,33 kr | |
|---|---|---|
| 10–30 stk. | 1 454,39 kr | −3 % |
| 31+ stk. | 1 433,61 kr | −5 % |
Produktinformasjon "SG-3081-G DC Current Input Signal Conditioner, 1000 VDC Isolated"
The SG-3081-G takes a unipolar 0 to 20 mA or 4 to 20 mA DC current input and delivers a 0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA or 4 to 20 mA output. Input, output and power circuits are separated by 1000 VDC, which helps keep signal paths clean in noisy industrial installations.
Input and output ranges are chosen through internal configuration switches, so the same module can be matched to different controllers without changing the hardware. Two potentiometers, labelled Zero and Span, allow the accuracy of the chosen range to be fine-tuned, and an LED indicates that the module is operating correctly.
- Suits engineers needing isolated current-to-voltage or current-to-current conversion on a DIN rail.
Applications
- Converting 0/4 to 20 mA sensor or transmitter signals to 0 to 5 V or 0 to 10 V inputs
- Isolated current-to-current signal conversion between control systems
| Product type: | Signal conditioner |
|---|---|
| Analog outputs: | 1 |
| Isolation: | 1000 VDC three-way |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Spesifikasjoner
| Isolation | |
|---|---|
| Three-way Isolation | 1000 VDC |
| Analog Input | |
| Type | 0 ~ 20 mA, 4 ~ 20 mA (Unipolar) |
| Accuracy | ±0.1% of full range |
| Bandwidth | 1KHz |
| Input Impedance | 250 Ω |
| Analog Output | |
| Channels | 1 |
| Range | Voltage: 0 ~ 5 VDC, 0 ~ 10 VDC Current: 0 ~ 20 mA, 4 ~ 20 mA |
| Current Load Resistance | 0 ~ 500 Ω (Source) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 1.61 W (Voltage Output), 2.10 W (Current Output) |
| Mechanical | |
| Dimensions (mm) | 25 mm x 114 mm x 70 mm (W x L x H) |
| Environment | |
| Operating Temperature | -25 °C ~ 75 °C |
| Storage Temperature | -30 °C ~ 75 °C |
| Humidity | 5 ~ 95%, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn