Hopp til hovedinnhold Hopp til søk Gå til hovednavigasjon

tZT-P4C4 ZigBee Wireless I/O Module, 4-ch Isolated DI and 4-ch Isolated DO

Produktinformasjon "tZT-P4C4 ZigBee Wireless I/O Module, 4-ch Isolated DI and 4-ch Isolated DO"

The tZT-P4C4 is a compact ZigBee router that brings four isolated digital inputs and four isolated digital outputs onto a 2.4 GHz wireless link. It suits remote switch and status monitoring, or switching of loads, at points where running cable is difficult or costly. Each channel is photocoupler isolated, and the module offers 3750 VDC intra-module isolation.

The digital inputs are source-type wet contacts with a 100 Hz frequency rating, and each channel can be configured as a 16-bit counter with a maximum count of 65535. The outputs are isolated open-collector, sink-type channels rated at 700 mA per channel, with overvoltage and overload protection. Power-on and safe output values are programmable, so outputs can be set to a defined state at start-up or when communication is lost.

The module is fully compliant with the ZigBee 2007 Pro and IEEE 802.15.4 specifications and can act as a repeater to extend the network. Wireless traffic is protected with AES-128 encryption. Configuration is carried out with the Windows GUI configuration software. Supported protocols are DCON and ModBus. Note that this ordering code is listed for Asia only.

Applications

  • Remote monitoring of switches and dry or wet contacts in hard-to-wire locations
  • Wireless switching of loads through isolated sink-type outputs
  • Event and pulse counting over a wireless link using the 16-bit counter inputs
Product type: Wireless I/O Module
Interface: ZigBee
Protocol: DCON, Modbus
Digital inputs: 4
Digital outputs: 4
Isolation: 3750 VDC
Operating temperature: -25 ~ +75 °C
Mounting: DIN-rail

Spesifikasjoner

CPU Module
Watchdog TimerModule(1.6seconds),Communication(Programmable)
EMS Protection
EFT (IEC 61000-4-4)±1 kV for Power
ESD (IEC 61000-4-2)±4 kV Contact for each Terminal
LED Indicators
Status1 x Power and Communication
ZigBee
Antenna2.4 GHz - PCB Antenna (3dBi, 50Ω)
ProtocolSupports DCON and ModBus
StandardZigBee 2007 Pro
Transmission Power11dBm (Max. 19dBm)
Transmission Distance (LoS)300 m
Digital Input/Counter
Channels4
TypeWet Contact
Sink/Source (NPN/PNP)Source
ON Voltage Level+6 VDC ~ +50 VDC
OFF Voltage LevelMax. +5 VDC
Max. Counts65535 (16-bit)
Frequency100 Hz
Min. Pulse Width5 ms
Input Impedance10 KΩ, 0.66W
Overvoltage Protection± 70 VDC
Digital Output
Channels4
TypeIsolated Open Collector
Sink/Source (NPN/PNP)Sink
Load Voltage+3.5 ~ +50 VDC
Load Current700mA/channel
Overvoltage ProtectionYes
Overload ProtectionYes
Power on ValueYes, Programmable
Safe ValueYes, Programmable
Power
Consumption1 W Max.
Mechanical
Dimensions (mm)98 x 52 x 27 (W x L x H)
InstallationDIN-Rail Mounting
Environment
Operating Temperature-25 ~ +75°C
Storage Temperature-30 °C ~ +80 °C
Humidity10 ~ 95% RH, Non-condensing

Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.

0 av 0 vurderinger

Gjennomsnittlig vurdering av 0 av 5 stjerner

Legg igjen en anmeldelse!

Del dine erfaringer med andre kunder.