PCI-FC16U Universal PCI Counter/Frequency Board, 16-ch Input with 32-ch DIO
Universal PCI card with 16 counter/frequency inputs up to 250 kHz and 32 programmable digital I/O channels, supplied with one CA-4002 D-Sub connector.
- Universal PCI interface compatible with 3.3 V and 5 V bus slots
- 16 counter/frequency channels, configurable for up-counting or frequency measurement
- Frequency range 1 Hz to typically 250 kHz in both modes, with ± 0.4 % frequency accuracy
- 32 programmable digital I/O channels, 5 V/TTL, with DO readback
- Pull-high and pull-low resistors on DI channels for a defined input state
- Digital filter adjustable from 1 to 32767 μs
3 469,76 kr per stk.
| 1–9 stk. | 3 469,76 kr | |
|---|---|---|
| 10–30 stk. | 3 365,87 kr | −3 % |
| 31+ stk. | 3 293,15 kr | −5 % |
Produktinformasjon "PCI-FC16U Universal PCI Counter/Frequency Board, 16-ch Input with 32-ch DIO"
PCI-FC16U CR is a 32-bit PCI board for high-speed counting and frequency measurement, fitted to the universal PCI bus so it works in both 3.3 V and 5 V slots. Its 16 counter channels can each be set up for frequency measurement or up-counting, with signals up to 250 kHz.
The board also provides 32 programmable digital I/O channels, each rated 5 V/TTL. Pull-high and pull-low resistors on the DI channels hold a defined level when an input is disconnected or interrupted, rather than leaving it floating. An onboard 4-bit Card ID switch lets software tell boards apart when two or more are installed in the same PC.
Driver support covers DOS and Windows, with a DLL and ActiveX control. Sample programs are provided for several languages and environments, including C#.NET, Visual Basic.NET and LabVIEW, to help engineers start application development quickly. The package includes one CA-4002 D-Sub connector.
Applications
- High-speed pulse counting and event totalising
- Frequency measurement of pulse signals up to 250 kHz
- Digital I/O for PC-based test and control
- Multi-board PC systems needing software board identification
| Product type: | PCI DAQ board |
|---|---|
| Interface: | PCI |
| Digital inputs: | 32 |
| Digital outputs: | 32 |
| Isolation: | Counter inputs |
| Operating temperature: | 0 ~ +60 °C |
Spesifikasjoner
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin box header x 2 |
| Card ID | Yes (4-bit) |
| Digital Input | |
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Pull-high/Pull-low Resistors | Yes |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 32 (Bi-Direction) |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| DO Readback | Yes |
| Counter/Frequency/Encoder Input | |
| Channels | 16 |
| Type | Isolated Input |
| Counter Mode | Yes(Up Counter) |
| Frequency Mode | Yes |
| Max. Counter/Frequency | 1 Hz ~ (typically ) 250 kHz (both counter mode and frequency mode) where 250 kHz is calculated as followings: Supposed that duty cycle = 50%, refer to Minimum Pulse Duration of High Level, we have pulse period = 2 μs x 2 = 4 μs, which is 250 kHz as a max. Refer to Min. Pulse Duration of High Level, Max. Frequency is highly affected by duty cycle. |
| Frequency Accuracy | ± 0.4 % |
| Isolated, Input Level | Logic 1: +4.5 VDC ~ +30 VDC Logic 0: +1 VDC Max. |
| Low Pass Filter | 1 ~ 32767 μs |
| Power | |
| Consumption | 700 mA @ +5 V |
| Environment | |
| Operating Temperature | 0°C to +60°C |
| Humidity | 5 to 85% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn