ET-2242U-32 Ethernet I/O Module, 32-ch Digital Output (Sink/Source)
32-channel Sink/Source digital output module with a built-in 2-port Ethernet switch for daisy-chain wiring, supporting Modbus TCP/UDP, MQTT and SNMP V2c.
- 32 digital outputs, Sink/Source type, 300 mA per channel with short-circuit protection
- Built-in 2-port Ethernet switch with LAN bypass for daisy-chain wiring
- Modbus TCP/UDP, MQTT and SNMP V2c support for control, messaging and monitoring
- I/O Pair Connection (Push and Pull) for DI-to-DO pairing over Ethernet
- 3000 V DC I/O isolation and EMS protection (EFT, ESD, surge)
- Programmable DO power-on and safe values, dual-watchdog support
2 721,79 kr per stk.
| 1–9 stk. | 2 721,79 kr | |
|---|---|---|
| 10–30 stk. | 2 649,07 kr | −3 % |
| 31+ stk. | 2 586,74 kr | −5 % |
Produktinformasjon "ET-2242U-32 Ethernet I/O Module, 32-ch Digital Output (Sink/Source)"
The ET-2242U-32 provides 32 digital outputs in one DIN-rail Ethernet module, with each channel able to drive a 300 mA load. Every output is photocoupler isolated and short-circuit protected, and the Sink/Source type suits both NPN and PNP field wiring.
A built-in two-port Ethernet switch with LAN bypass supports daisy-chain topologies, which simplifies installation and reduces infrastructure cost. I/O Pair Connection allows remote DI data to be written to local DO channels in Pull mode via Modbus TCP, while the module can also be monitored over SNMP V2c or integrated through MQTT publish and subscribe messaging.
For electrically noisy plants, the module offers 3000 V DC I/O isolation and EMS protection against EFT, ESD and surge. Power-on and safe output values are programmable, and a built-in web server is available for configuration.
Applications
- Factory Automation
- Machine Automation
- Building Automation
- Remote Diagnosis & Maintenance
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Digital outputs: | 32 |
| Ports: | 2 |
| Isolation: | 3000 VDC I/O |
| Power input: | +10 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Spesifikasjoner
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit ARM |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet, I/O |
| Digital Output | |
| Channels | 32 |
| Type | Push-Pull |
| Sink/Source (NPN/PNP) | Sink/Source |
| Load Voltage | +3.5 ~ +80 V |
| Load Current | 300 mA/channel |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-Tx, Switch Ports |
| LAN bypass | Yes |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.4 W (max.) |
| Powered from Terminal Block | +10 ~ +48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 31 x 157 x 129 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn