Hopp til hovedinnhold Hopp til søk Gå til hovednavigasjon

RS-405AFCS-T Redundant Ring Switch, 5-Port with 2 Single-Mode SC Fibre Ports

Produktinformasjon "RS-405AFCS-T Redundant Ring Switch, 5-Port with 2 Single-Mode SC Fibre Ports"

RS-405AFCS-T is a 5-port managed-free industrial Ethernet switch for building real-time redundant ring networks. It provides three 10/100Base-TX RJ-45 ports and two 100Base-FX single-mode fibre ports with SC connectors, so a ring can span longer distances than copper alone allows. The built-in Cyber-Ring technique lets several switches form a redundant ring, with recovery from a copper link failure in approximately 20 ms.

Configuration is kept simple, with no software setup required. Redundancy mode and maximum recovery time are selected with DIP switches, and the unit accepts two DC power sources connected simultaneously, so one can back up the other. A relay output signals power failure or network link failure. Modbus/RTU and Modbus/TCP remote monitoring is supported, along with a Modbus OPC Server.

This ordering code, RS-405AFCS-T CR, is the RoHS-listed version of the single-mode SC fibre model. The unit operates from -30 °C to +75 °C and mounts on a DIN rail in a plastic housing rated IP30.

Applications

  • Industrial control and automation networks
  • Redundant Ethernet ring topologies
  • Long-distance fibre links within an industrial Ethernet network
Product type: Redundant ring switch
Interface: RJ-45, SC fibre
Protocol: Modbus RTU, Modbus TCP
Relay outputs: 1
Ports: 5
Isolation: 1500 Vrms
Power input: +12 ~ +48 VDC
Operating temperature: -30 ~ +75 °C
Mounting: DIN-rail
Housing: Plastic

Spesifikasjoner

LED Indicators
Status10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port)
Ethernet
Ports3 x RJ-45, 10/100Base-TX
StandardsIEEE 802.3, IEEE 802.3u, IEEE802.3x
Processing TypeStore & forward wire speed switching
MAC Table1024
Memory Bandwidth3.2 Gbps
Frame Buffer Memory512 Kbit
Flow ControlIEEE 802.3x flow control, back pressure flow control
ProtocolModbus/RTU, Modbus/TCP
Redundant StrategySTP, Ring (ICP DAS)
Isolation1500 Vrms 1 minute
DIP SwitchYes,
1x Redundancy mode confi guration
1x Max. Recovery time selection
Fiber
Ports2-port 100 Base-FX
SC connector
ModeSingle-Mode
Fiber Cable8.3/125, 8.7/125, 9/125 or 10/125 gm
Distance30 km, (9/125 gm recommended) for full duplex
Wavelength1300 or 1310nm
TX Output-15 dBm Min.
-8 dBm Max.
RX Sensitivity-34 dBm
RX Overload-5 dBm
Budget19 dBm
COM Ports
Ports1 x RS-232/RS-485
Power
Reverse Polarity ProtectionYes
Input Range+12 ~ +48 VDC
Redundant Power InputsYes
Consumption0.4 A @ 24 VDC
Alarm OutputYes,Relay 2 A @ 30 VDC
Mechanical
CasingPlastic
Dimensions (mm)64 x 118 x 101 (W x L x H)
InstallationDIN-Rail Mounting
Ingress Protection RatingIP30
Environment
Operating Temperature-30 °C ~ + 75 °C
Storage Temperature-40 °C ~ + 85 °C
Humidity10 ~ 90% RH, non-condensing

Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.

0 av 0 vurderinger

Gjennomsnittlig vurdering av 0 av 5 stjerner

Legg igjen en anmeldelse!

Del dine erfaringer med andre kunder.