NS-200AFCS-60T Media Converter, 10/100Base-TX to 100Base-FX, 60 km Single-Mode
Converts one 10/100Base-TX port to a 100Base-FX single-mode SC link rated for 60 km, operating from -30 to +75 °C on a +12 to +48 VDC supply.
- Single-mode 100Base-FX fibre port with SC connector, rated for 60 km
- Automatic 10/100 Mbps negotiation and auto MDI/MDI-X on the RJ-45 port
- Store-and-forward architecture with IEEE 802.3, 802.3u and 802.3x flow control
- Operating temperature range of -30 ~ +75 °C
- Wide +12 ~ +48 VDC input with reverse polarity protection
- 1500 Vrms isolation for 1 minute between the Ethernet side and the chassis
2 565,96 kr per stk.
| 1–9 stk. | 2 565,96 kr | |
|---|---|---|
| 10–30 stk. | 2 493,24 kr | −3 % |
| 31+ stk. | 2 441,30 kr | −5 % |
Produktinformasjon "NS-200AFCS-60T Media Converter, 10/100Base-TX to 100Base-FX, 60 km Single-Mode"
NS-200AFCS-60T is an industrial media converter that bridges a copper 10/100Base-TX Ethernet segment and a 100Base-FX single-mode fibre link with an SC connector, rated for 60 km. It suits engineers who need to extend an Ethernet connection over a long fibre run without changing the connected equipment.
The RJ-45 port negotiates 10 or 100 Mbps automatically and detects MDI/MDI-X wiring itself, so it can be installed without crossover cables. The store-and-forward design handles traffic between the two media, and reverse polarity protection guards the power input.
The unit accepts a wide +12 to +48 VDC supply and runs from -30 to +75 °C. Its slim plastic housing mounts on a DIN rail, and the status LEDs show power, speed, link activity and fibre duplex mode.
Applications
- Extending industrial Ethernet links over single-mode fibre up to 60 km
- Connecting RJ-45 equipment to a fibre backbone in DIN-rail mounted control panels
| Product type: | Media Converter |
|---|---|
| Interface: | 10/100Base-TX, 100Base-FX |
| Ports: | 1 x RJ-45, 1 x SC |
| Isolation: | 1500 Vrms |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -30 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Spesifikasjoner
| LED Indicators | |
|---|---|
| Status | PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward, wire speed switching |
| MAC Table | 1024 |
| Memory Bandwidth | 1.4 Gbps |
| Frame Buffer Memory | 256 Kbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| Fiber | |
| Ports | 1 x 100 Base-FX, SC connector |
| Mode | Single-Mode |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125μm |
| Distance | 60 km |
| Wavelength | 1300 or 1310nm |
| TX Output | -5 dBm Min. 0 dBm Max. |
| RX Sensitivity | -35 dBm |
| RX Overload | -5 dBm |
| Budget | 30 dBm |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +48 VDC (Non-isolation) |
| Consumption | 0.12 A @ 24 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 107 x 78 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn