NS-200AFC-T Media Converter, 10/100 Base-TX to 100 Base-FX Multi-Mode SC
Industrial 10/100 Base-TX to 100 Base-FX media converter with one RJ-45 port and one multi-mode SC fibre port. Operates from -30 °C to +75 °C on a +12 to +48 VDC input.
- Converts one 10/100 Base-TX RJ-45 port to one 100 Base-FX multi-mode SC fibre port
- Automatic MDI/MDI-X crossover for plug-and-play installation
- Auto negotiation for 10/100 Mbps Ethernet speeds
- Store-and-forward architecture with IEEE 802.3x flow control
- Fibre distance of 2 km on multi-mode fibre, 62.5/125 μm recommended for full duplex
- Operating temperature range of -30 °C to +75 °C
1 755,66 kr per stk.
| 1–9 stk. | 1 755,66 kr | |
|---|---|---|
| 10–30 stk. | 1 703,71 kr | −3 % |
| 31+ stk. | 1 662,16 kr | −5 % |
Produktinformasjon "NS-200AFC-T Media Converter, 10/100 Base-TX to 100 Base-FX Multi-Mode SC"
The NS-200AFC-T CR converts a 10/100 Base-TX copper Ethernet connection into a 100 Base-FX multi-mode fibre link, with one RJ-45 port on the copper side and one SC connector on the fibre side. It suits industrial Ethernet runs that need a copper-to-fibre transition inside a control cabinet or along a plant network.
On the Ethernet side the converter negotiates 10/100 Mbps speed automatically and switches between MDI and MDI-X automatically, so straight or crossover cables can be used without configuration. It uses store-and-forward switching, supports IEEE 802.3x flow control and includes reverse polarity protection on its power input. The fibre port is specified for 2 km over multi-mode fibre, with 62.5/125 μm recommended for full duplex operation.
The housing is plastic with DIN-rail mounting and measures 33 x 107 x 78 mm (W x L x H). It is rated for operation from -30 °C to +75 °C and storage from -30 °C to +85 °C, at 10% to 90% RH non-condensing. The power input accepts +12 to +48 VDC and is non-isolated.
Applications
- Extending industrial Ethernet links from copper to multi-mode fibre
- Connecting copper-based devices to a fibre backbone in control cabinets and plant networks
| Product type: | Media Converter |
|---|---|
| Interface: | RJ-45, SC |
| Ports: | 2 |
| Isolation: | 1500 Vrms |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -30 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Spesifikasjoner
| LED Indicators | |
|---|---|
| Status | PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward, wire speed switching |
| MAC Table | 1024 |
| Memory Bandwidth | 1.4 Gbps |
| Frame Buffer Memory | 256 Kbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| Fiber | |
| Ports | 1 x 100 Base-FX, SC connector |
| Mode | Multi-Mode |
| Fiber Cable | 50/125, 62.5/125 or 100/140 μm |
| Distance | 2 km, (62.5/125 μm recommended) for full duplex |
| Wavelength | 1300 or 1310nm |
| TX Output | -20 dBm Min. -14 dBm Max. |
| RX Sensitivity | -32 dBm |
| RX Overload | -8 dBm |
| Budget | 12 dBm |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +48 VDC (Non-isolation) |
| Consumption | 0.12 A @ 24 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 107 x 78 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Spesifikasjoner som oppgitt av produsenten. Med forbehold om endringer.
Nedlastinger
Logg inn